No remote amp turn on signal

Subscribe
Jul 14, 2011 | 09:18 PM
  #1  
For some reason today when i was driving the sound quite on my radio. Everything is working but no sound. I went in to my truck to see if my amp for my subs was working and the power light is off. So I'm assuming its something with the remote wire. I'm running the stock HU. Any ideas what it could be? Thanks for the help
Reply 0
Jul 15, 2011 | 08:35 AM
  #2  
Blown fuse, remote turn on wire, amp dead power wire or ground write... Test all if the wires with a voltmeter and too should be able to narrow it down.
Reply 0
Jul 15, 2011 | 08:58 AM
  #3  
Thanks for your help. I don't think its a fuse. Because when I turned on my car this morning and last night everything worked for about a min then stopped and there was nothing. But my stock hu worked just no sound.Kinda weird.Possible a problem with my bose amp?
Quote: Blown fuse, remote turn on wire, amp dead power wire or ground write... Test all if the wires with a voltmeter and too should be able to narrow it down.
Reply 0
Jul 15, 2011 | 06:09 PM
  #4  
Yep could be the amp, they are prone to failure, just like the factory headunits.
Reply 0
Subscribe