So I've tried posting in car audio security forums and researching online with no luck, so I was hoping that one of my fellow G35 buddies was a car security guru, and could help me out. So long story short, I've had a Viper 5701 in my car for a few years now. I went and purchased a new remote, my wife lost the backing to one of my remotes. So the procedure is:
Prepare the vehicle system for pairing:
1. Open at least one of the vehicle’s doors.
2. Turn the key to the ON position.
3. Within 5 seconds press and release 1 time the Control button on
the Control Center.
4. Within 5 seconds, press and hold the Control button. The status
LED will flash one time and the siren will chirp once to confirm the
system is ready for remote pairing.
5. Release the Control button and proceed below.
Pairing will exit if:
���� Step 7 below is not completed within 60 seconds
���� The doors are closed
The ignition is turned off.
Prepare the remote control for pairing:
6. Enter programming to access the Main Menu
7. Press and hold the button for 1 second, 3 transmit LED flashes
and 3 beeps indicate remote is ready to pair.
8. Press the button,
Responder LE: the siren will chirp and the remote will emit several
tones to confirm pairing is complete. If the remote does not emit the
tones repeat step 7.
1-way companion: the siren will chirp to confirm the system has
learned the remote control.

Problem is, when I hit the control button on the antenna, it never chirps, it doesn't do anything. Any suggestions?