Setting Voltage on Navone LOC
Thread Starter
|
Registered User
Joined: Apr 2004
Posts: 82
Likes: 0
Setting Voltage on Navone LOC
How do we set the voltage on the David Navone NE-77V Line Output Converter? I currently have it tapped right after the stock bose headunit and turned the gains about 80% up and ran the RCAs to my eclipse amp and some songs sound like CRAP.
I know the instructions say to turn the voltage up to MAX, but I am not quite sure this is the way to go for our bose head units? Anyone else have experience with this? Much thanks.
I know the instructions say to turn the voltage up to MAX, but I am not quite sure this is the way to go for our bose head units? Anyone else have experience with this? Much thanks.
It's not the critic......
Joined: Sep 2004
Posts: 682
Likes: 2
From: Houston, TX
I measured the voltage output from the stock HU using an oscilliscope and it only measures 2.2V peak to peak! (I used and IASKA Test CD) I have my HU output going straight into my xover.....no LOC required!
If you need to turn the LOC all the way up, what is it doing for you?.......adding a LOC in our system only adds another set of connections that could cause future problems and adds costs (not much I admit, but what is it doing?)
IMO a LOC is not required with the low level output form our stock HU........
If you need to turn the LOC all the way up, what is it doing for you?.......adding a LOC in our system only adds another set of connections that could cause future problems and adds costs (not much I admit, but what is it doing?)
IMO a LOC is not required with the low level output form our stock HU........
Thread
Thread Starter
Forum
Replies
Last Post
Mad A
Not G35 Related
4
Dec 8, 2015 01:45 PM
