DIY Reference Site?
Joined: May 2005
Posts: 1,464
Likes: 2
From: Raleigh, NC
DIY Reference Site?
Anyone see value in this? I was thinking of putting up a page with pictorial & non-pictorial DIY for the G35 (coup & sedan). It wouldn't be a substitute for driver.com, just an augmentation. I've been frustrated recently by the difficulty in finding some of the DIY that are not stickied and the problem with 99% of all images in the DIYs now being corrupt.
Not going to do it if people don't see the value, or maybe this already exists some place?
Posted this in the Audio/Video section because that's primarily what I DIY in regards to.
Not going to do it if people don't see the value, or maybe this already exists some place?
Posted this in the Audio/Video section because that's primarily what I DIY in regards to.
Last edited by amthar; Sep 26, 2005 at 02:46 PM.
It will probably be a largely thankless job, but make it and people will use it. Feel free to use any of the install instructions or images on the digitalwheelz site as a starting point for anything and I would be happy to link to or host anything you do for the G35 there.
I get asked alot about the specifics of running wires to the trunk or doing full carputer installs. I don't think theres alot of formal documentation out there especially now that the images on g35driver.com are gone.
I get asked alot about the specifics of running wires to the trunk or doing full carputer installs. I don't think theres alot of formal documentation out there especially now that the images on g35driver.com are gone.
Last edited by god_of_cpu; Sep 26, 2005 at 07:11 PM.
Joined: May 2005
Posts: 1,464
Likes: 2
From: Raleigh, NC
I don't need thanks, I'm pretty egotistical, I know I'm awesome 
What I do need are the actual DIYs. For the sake of making my life easy I'm going to make the site a static site, no message boards, etc, etc. Makes it easy to maintain and operate as well as update. People can submit DIY via email or PM me on here, or link to a DIY that I can copy.
Picture DIYs are much more desired then non-picture ones, but I'll take anything I can get.
So send me DIYs anyway you can! jmtucker at rtpnet dot com is my email.
God_of_CPU, you said you'd host it?

What I do need are the actual DIYs. For the sake of making my life easy I'm going to make the site a static site, no message boards, etc, etc. Makes it easy to maintain and operate as well as update. People can submit DIY via email or PM me on here, or link to a DIY that I can copy.
Picture DIYs are much more desired then non-picture ones, but I'll take anything I can get.
So send me DIYs anyway you can! jmtucker at rtpnet dot com is my email.
God_of_CPU, you said you'd host it?
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 DIY
10
Apr 23, 2018 11:13 AM
Ninjay16
Audio/Video/Electronics
11
Feb 26, 2018 06:14 PM



