true...

 

nice will use this on the weekend as a guide

 

+1

I'm going on my second window motor. I think autozone has the best deal as long as you could do the install yourself.

 

For companies like infiniti and Nissan having issues with the window motors is not good. The engineers should have thought of a better build of motor or better positioning...autozone is inexpensive and the way to go...

 

wat if you do let the window go down????

 

for those of you interested I also have the same type write up with clear pics and very detailed instructions as well.

https://g35driver.com/forums/body-in...l-removal.html

 

Cool diy

 

Hey Guys,
Can anyone eloborate on how to clean the carbon out of the window motor? More specifically, how do you disassemble the motor? I have taken the housing off (that contains the strong magnets) but not sure of the next step. Somone mentioned giving the brushes a quarter turn, another thread (on the 350Z site) says somehing about removing 3 screws (I think he is speaking about the housing iteslf, not the internal workings.

In any event, I was not clear on the instructions and only cleaned off the magnet and the exterior of the rotating part with the windings and it is still intermittant. I am going in again and want to be ready! Thanks in advance.

 

thanks, awesome write up

 

have not had my coupe for 24 hours, and i gotta look for help on this subject. not sitting well with me. grrrr...

 

Thank you jthomas those pictures and information really worked on my situation since I had to replace the motor on my 05 infiniti g35 coupe,thanks again.

 

anyone onw know where i can get the motor for rear right door for cheap ?

 

Very nice write up...im am going to have to do this soon....hopefully just cleaning the motor will fix my problem

 

TYTYTYTYYTYTY
TY!

My G decided tonight was the night it was going to throw a fit and not let my window up.

 

Ok regarding this i have an issue with my drivers side window when i auto roll it up it goes up then back down a quarter of the way open does this mean i need to change the motor or is there something else that would be causing this