PIC REQUEST...350z TEIN S TECH

Subscribe
Sep 15, 2006 | 09:32 AM
  #1  
as it say im in the market for some springs searched couldnt find many pic at all...whoever has these springs can you post a pic so i can know how much of a drop there is and how it looks. thanks
Reply 0
Sep 15, 2006 | 12:18 PM
  #2  
-1.2 front/-0.9 rear
Reply 0
Sep 15, 2006 | 07:53 PM
  #3  
I took these pictures the day the springs were installed.



Reply 0
Sep 15, 2006 | 08:20 PM
  #4  
^^^^ Looking really sweeeet!
Reply 0
Sep 15, 2006 | 08:45 PM
  #5  
^^+1 Love that drop!! Where do you usually set your DSPs btw? Which camber kits are you using if any?
Reply 0
Sep 15, 2006 | 08:51 PM
  #6  




350z s-techs, way better then g35 s-techs (spring rates). i had a whole thread with before and after pics. search my sn.
Reply 0
Sep 16, 2006 | 11:45 AM
  #7  
Quote: ^^^^ Looking really sweeeet!
Thanks, Andy!

Quote: ^^+1 Love that drop!! Where do you usually set your DSPs btw?
Thanks. I have them set on 5, but I've only had them on for a little over a week.

Quote: 350z s-techs, way better then g35 s-techs (spring rates). i had a whole thread with before and after pics. search my sn.
I bought them because of the spring rate, too.

M wheels look good on your G... I like the blacked out grill too... Looks great!!!
Reply 0
Sep 16, 2006 | 01:19 PM
  #8  
Nice lookin cars. Whats the difference between the S-techs and H-techs?
Reply 0
Sep 16, 2006 | 03:32 PM
  #9  
Quote: Nice lookin cars. Whats the difference between the S-techs and H-techs?
The best information is on Tein's web site. Here's the page for S.Tech and here's the page for H.Tech.
Reply 0
Sep 16, 2006 | 03:56 PM
  #10  
The website says a 1.5" drop, but those pictures don't seem to show the cars that low. Is it just me?
Reply 0
Sep 16, 2006 | 04:31 PM
  #11  
Quote: The website says a 1.5" drop, but those pictures don't seem to show the cars that low. Is it just me?
I don't know where you got a 1.5 inch drop. S.Tech for a G35 Coupe is 1.2 front and 0.9 rear.

I have the 350z S.Techs. The web site shows 0.7 front and 0.6 back. Add the half inch for a G and you get 1.2 front and 1.1 back, which is about right.
Reply 0
Sep 16, 2006 | 04:45 PM
  #12  
Quote: I don't know where you got a 1.5 inch drop. S.Tech for a G35 Coupe is 1.2 front and 0.9 rear.

I have the 350z S.Techs. The web site shows 0.7 front and 0.6 back. Add the half inch for a G and you get 1.2 front and 1.1 back, which is about right.
Ah..I didn't read the specs just for the G/Z. The Tein webpage says the S-tech generally gives a 1.5" drop. At any rate, ~1" seems right. Thanks.
Reply 0
Sep 18, 2006 | 01:56 PM
  #13  
Quote: I took these pictures the day the springs were installed.



LOOKS REAL GOOD...DID YOU KEEP OUR OEM SHOCKS...AND ALSO DID YOU HAVE TO GET CAMBER KITS FOR FRONT AND REARS???
Reply 0
Sep 18, 2006 | 03:30 PM
  #14  
Quote: LOOKS REAL GOOD...DID YOU KEEP OUR OEM SHOCKS...AND ALSO DID YOU HAVE TO GET CAMBER KITS FOR FRONT AND REARS???
Thanks!

I changed shocks to Tokico DSP-9 adjustables.

I just bought an SPC rear camber arm and toe bolt kit from Peter at IAP in Orlando. I'm pretty sure the rear needs the kit.

I'm still trying to decide if I need a kit for the front before I get it aligned. I may go ahead and get the new SPL front kit, or I might put the rears on and get it aligned to see how close the front is. I haven't decided which yet.

My plan is to drive it for a month before I have it aligned. I've got a little over two weeks to go.
Reply 0
May 1, 2007 | 02:57 PM
  #15  
i am gettting the same set of suspension you get, but looks like i wanna drop a bit more than that~~ what are my choice beside coilover?
Reply 0