Those are Sevas the first one is the S-Star and the second is the S-10. The S-10 come in 22" but see for yourself heres their website http://sevaswheels.com/home.html

 

Those sevas do not come in 20s. As mentioned above the S-Stars come in 19 inch and the S-10s come in 22 inch.

 

Thanks Guys...

@ KrazyEd...u sure this website says that the S-Stars come in 20 also

http://www.directwheelsandtires.com/sevas-wheels.php

 

The S-Stars do come in 19's if your interested PM AutoMotiveMods there here on the board and they have the best prices in my opinion.

 

Good lookin seddon

The S-22's are ferocious too....choices choices

Hey what's up with the myth that the Sedan can't fit 10 inch rims in the back??

This one guy told me if i wanted a lip i shoulda bought a sedan....Pretty much everywhere else there saying i'm fine...

 

who's tellin you 10" wont fit out back?! plenty of people here have done it, including myself. Just make sure the offset is +40 and up and you roll your fenders and they'll fit fine with no problems.
-GP-

 

^ K...excuse my ignorance but what does "roll your fenders mean"?

 

If you put finger inside your rear fender you will feel that there is a 1/2" lip that's what you gotta roll.

 

15 minutes ago i rolled my fenders a little more since they were rubbing on hard turns, now they're almost flat at the top point. All you need is a blow dryer/heat gun and a baseball bat or piece of pvc pipe. I used my sisters blow dryer and a peice of 1/2" pvc pipe since my car is sooo damn low i cant get anything bigger between the tire and the fender. 'accordfreak' did a DIY guide on fender rolling a couple weeks ago.
-GP-

 

So ur not actually rolling your fender up underneath the car....like i'm envisioning

U'll be taking a tube (bat or pvc) and???

*feels dumb*

 

Maybe check out the DIY that was just mentioned above...that should help you.

 

not really rolling them, you're flattening them up against the inside of the outer fender. You just stick the pvc pipe in one side of the tire and roll it along the tire while applying pressure toward the wheel and it will flatten or "roll" the fender. -GP-

 

Thanks..Gdup35

Thats what i thought in my head

 

OK this is my first time in this thread.

Those first wheels are nasty. Please don't get them.

If you want a big lip on 20's get the Sevas S-55's, see my car. The lip is almost as big as those and looks quite nice. Talk to Kenny at AutoMotiveMods for a great deal.

And 10" will fit on the rears with rolled fenders. I have had two sets with a big drop.

 

Yeah my new leading rims are the Sevas S-22s...I changed it up on page three...



*bites fist*