HKS RS Coilovers

Old Feb 22, 2007 | 01:25 AM
  #1  
Deang35c6's Avatar
Thread Starter
|
Registered User
Joined: Jun 2003
Posts: 1,134
Likes: 0
From: San Diego
HKS RS Coilovers

I've decided to upgrade my suspension from the D-spec/350Z S-tech combo to the HKS RS coilover. There is only one part #(80040-XN001) for both applications (G&Z). I know most 350Z springs drop the Coupe 1/2 inch on top of what's advertised. I got a total drop of 1.2 with the S-techs for the 350Z. Does the same apply for the HKS RS since there is only one type? I read that the minimum drop is .7", does this mean my total drop up front before height adjustment will be 1.2"? I know weight of the car and rate of spring has alot to do with how much the drop will be. Does the same apply for coilovers?
 
Reply
Old Feb 22, 2007 | 02:19 AM
  #2  
cloud's Avatar
Registered User
iTrader: (3)
Joined: May 2005
Posts: 1,267
Likes: 0
From: Rowland heights, CA
according to the hks hipermax rs manual you will be dropped -20mm from stock front and -10mm from stock rear with the default settings.
oops sorry, i thought it was the 350z forum heights changed.
 

Last edited by cloud; Feb 22, 2007 at 04:00 AM.
Reply
Old Feb 22, 2007 | 03:49 AM
  #3  
Deang35c6's Avatar
Thread Starter
|
Registered User
Joined: Jun 2003
Posts: 1,134
Likes: 0
From: San Diego
That's about 3/4", but does that mean 3/4" + 1/2" due to the G35's weight over the 350Z?
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
VatoVazq
Steering & Suspension
16
Jan 3, 2025 11:08 PM
g.spot
G35 Cars
12
May 9, 2016 10:54 PM
Red G Coupe
Tuner & Dyno
9
Jan 14, 2016 01:13 AM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 11:07 AM.