Tein Basic work great with my 20's
Tein Basic work great with my 20's
Joined: Feb 2006
Posts: 3,442
Likes: 0
From: Long Island, N.Y.
Originally Posted by Hi-Tech_G
Nice...
I take it your coils aren't all the way down right?
I take it your coils aren't all the way down right?
before final dial in..I got plenty of speed bumps at work so I'm
Conservative right now
Joined: Feb 2006
Posts: 3,442
Likes: 0
From: Long Island, N.Y.
Originally Posted by Hi-Tech_G
Looks good though. Did you do an alignment or are you going to wait a bit?
60-70 miles on them so far and 8 miles on the meats.
Looking at 10 days/ hopefully I'll put at least 300 miles or so
on them.
Joined: Feb 2006
Posts: 3,442
Likes: 0
From: Long Island, N.Y.
Originally Posted by andy2434
Looks good . . . A bit more of a drop, an alignment, and you are good to go. Enjoy! 
settles anymore?
Trending Topics
Former G35driver Vendor
iTrader: (3)
Joined: Jul 2004
Posts: 2,296
Likes: 0
From: Berkeley CA, Diamond Bar CA
im at 10k on my basics and they're STILL settling. they've been going down about 1 finger every 3-4k-ish miles. Right when i installed them i skipped tein's recommended height and i set the rear at the lowest. it STILL had finger gap... but its gone now. just for your reference 
Originally Posted by Kyosho
im at 10k on my basics and they're STILL settling. they've been going down about 1 finger every 3-4k-ish miles. Right when i installed them i skipped tein's recommended height and i set the rear at the lowest. it STILL had finger gap... but its gone now. just for your reference
if it's adjusted all the way down you'll have about 1 finger gap in the back.
that's with 285 30 20 tires.
I took out one of the adjustment rings which eleminated any gap. I can't fit my fingers between the fender and the tires.
as for the front. mine is about 6-7 threads up counting from the bottom and the front wheels are slightly tucked. That's with 255.35.20 tires
hope that gives you an idea
that's with 285 30 20 tires.
I took out one of the adjustment rings which eleminated any gap. I can't fit my fingers between the fender and the tires.
as for the front. mine is about 6-7 threads up counting from the bottom and the front wheels are slightly tucked. That's with 255.35.20 tires
hope that gives you an idea
Joined: Feb 2006
Posts: 3,442
Likes: 0
From: Long Island, N.Y.
Originally Posted by bassholic
can i see a shot of your car from the rear. Do the tires/rims tilt inward?
havent done the alignment yet. best 1 I got of the current setup
Camber kit will go on next week
