Q's for Tein Basics Owners

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Sep 16, 2008 | 05:38 AM
  #1  
gangster3.5's Avatar
Thread Starter
|
Registered User
Joined: Dec 2007
Posts: 84
Likes: 0
Q's for Tein Basics Owners

I'm thinking of buying Basics for my 03 G coupe and i was wondering what is the highest ride height settings you can get with these (compared to stock ride height)? I want to be able to lower when i want to do "spirited driving" and not too low for daily driving so i dont scrape my gt spec stuff too much. Thanks for the replies.
 
Reply
Old Sep 16, 2008 | 11:41 AM
  #2  
emmi's Avatar
Registered User
Joined: Sep 2008
Posts: 5
Likes: 0
since the dampers in the front have been shortened to provide with a bit more travel. the highest setting you can get on the basics are -0.7 in the front and 0.2 for the rear.
 
Reply
Old Sep 16, 2008 | 04:31 PM
  #3  
gangster3.5's Avatar
Thread Starter
|
Registered User
Joined: Dec 2007
Posts: 84
Likes: 0
so that means almost 3 quarters of an inch lower than stock up front and almost a quarter of an in higher than stock in the back? Is that correct?

Also, If I keep my ride height close to stock will i still need a rear camber kit?
 

Last edited by gangster3.5; Sep 16, 2008 at 05:31 PM.
Reply
Old Sep 16, 2008 | 06:21 PM
  #4  
emmi's Avatar
Registered User
Joined: Sep 2008
Posts: 5
Likes: 0
^ yes becuz of the suspension set up for the rear... ur not given alot of range to begin with
 
Reply
Old Sep 17, 2008 | 12:53 AM
  #5  
gangster3.5's Avatar
Thread Starter
|
Registered User
Joined: Dec 2007
Posts: 84
Likes: 0
Wait yes to what question? and what do u mean by the ur not given a lot of range to begin with?
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NailBomb
G35 Cars
2
Oct 28, 2015 07:53 AM
invincible514
G35 Sedan V36 2007- 08
7
Sep 21, 2015 07:05 PM
TNRocker
New Members Check In
6
Sep 21, 2015 08:36 AM
invincible514
V36 Engine, Exhaust, Drivetrain & FI
1
Sep 15, 2015 05:06 PM
joeslates
New Members Check In
1
Sep 11, 2015 11:19 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 12:31 PM.