Just bought a spc upper control arm kit for my 05g35 coupe, im lowered on eibach sportlines. Can anyone tell me if i need to use the shims provided or will the control arms be enough camber adjustment alone.... Any help would be greatly appreciated,,,,,

 

Im not sure how much lower your car is with those springs but most people get back into specs without the spacers.

 

Thanks, my drop is 1.6f 1.4r. Just got in my spc kit, part number is 72125. do i have the revised kit or not... Thanks again...

 

I've heard of some problems caused by those shims? You should do a search and find out more.

 

I dont think you have the revised kit the revised kit end with a 050. 1 inch drop adds -.84 camber 2 adds -2.12 the spc font camber arm can corret up to(not sure)without adding the spacers. I saw it somewere all check it out. But im almost possitive that you will be good with just the arm.

 

I called spc and they said i had the revised kit, but who knows im not one to argue,,, lol. But just adding the arm corrects up to +1.5 degrees of camber and with the shims(+2degrees) provides +3.5 degrees of camber. I put the arms on today without spacers and was very pleased... I would rather ride with slight camber then to mess with my abs.. Just my take on it..

 

The revised kit is 72125. The UNREVISED kit is 72120