Recommended Spacer size?
#1
Recommended Spacer size?
What's up guys, need some advice on what size spacers I should get to get the closest to be completely "flush" as i can. I have 19x8.5" +20 up frontz on 245/35/ and 19x9.5" +25 in the rears on 285/35 GForce tires...here are some pictures taken, sorry for quality quick cell phone pics. Help me out guys what do you think?
These are the fronts:
and the rears:
I also plan on taking the "Stance" down alittle bit lower in the process of putting on the spacers as well. Just alittle more to take out the wheel gap that's left. I just have to adjust the coilovers a bit....sitting on tein basics by the way.
These are the fronts:
and the rears:
I also plan on taking the "Stance" down alittle bit lower in the process of putting on the spacers as well. Just alittle more to take out the wheel gap that's left. I just have to adjust the coilovers a bit....sitting on tein basics by the way.
#4
check your wheels and see if they have recessed areas behind the spokes for the extra length of stud sticking through if you use bolt on spacers. If you do, then any of the major bolt on spacer companies are fine, I prefer Eibach, but ichiba and project kics also make nice spacers. If you don't have that recessed area, you will need to use spacers that have replacement studs, i would use eibach or H&R at that point
#5
Thread
Thread Starter
Forum
Replies
Last Post
StreetStandard
Wheels & Tires-Vendor
80
08-30-2016 01:21 PM
marsman328
Northern California
1
08-11-2015 07:29 PM