R1 Concepts Premium Rotors
#1
Join Date: Oct 2004
Location: Santa Clarita, CA
Posts: 1,211
Likes: 0
Received 0 Likes
on
0 Posts
R1 Concepts Premium Rotors
For those of you with the R1 Concepts rotors, which way are they supposed to be installed? Are the slots/holes supposed to be going away from the center as they spin or towards the center? I don't remember which way the vanes go.. if they are "parallel" to the slots or opposite.
Update: R1 Concepts said that the pads should come in contact with the part of the slot closest to the hub, so the slots should go away from the center as they rotate. They said they can be installed either way, but they prefer this way so it takes less on the pads, but provide the same breaking performance. I dunno?
Thanks,
Jeff
Update: R1 Concepts said that the pads should come in contact with the part of the slot closest to the hub, so the slots should go away from the center as they rotate. They said they can be installed either way, but they prefer this way so it takes less on the pads, but provide the same breaking performance. I dunno?
Thanks,
Jeff
Last edited by vstypicals; 02-13-2009 at 08:00 PM.
Thread
Thread Starter
Forum
Replies
Last Post