installing tein basics..need help!!!!
#16
Join Date: Jun 2006
Location: SoCal
Posts: 1,084
Likes: 0
Received 0 Likes
on
0 Posts
#18
Here's the steps...
1. Unbolt the sway bar end link from the lower control arm
2. Unbolt the shock mount from the lower control arm
3. Unbolt the A-Arm (17mm wrench/socket)
4. Remove the 3 12mm bolts on the upper shock mount
5. Press everything down and pull the shock back up from the mount on the lower control arm
6. It's all out, now just put it all back together.
#19
#20
Join Date: Jun 2006
Location: SoCal
Posts: 1,084
Likes: 0
Received 0 Likes
on
0 Posts
yea i did the research, its just that the strut was a B1TCH...trust me!...and plus i trusted my friend a little too much...i think he got a little too frustated when the screw wouldnt come out and hammered the **** too f#$kin' much...about whatever what is done is done and ima have to get new parts...when i finally get everything up and running i post some pics...thanks everyone for the helpful advise!!!
#21
Join Date: Jun 2006
Location: SoCal
Posts: 1,084
Likes: 0
Received 0 Likes
on
0 Posts
hey can someone give me detailed list of what exactly my buddy and i need to do to put the 2 back struts off....im kinda second guessing him...my buddy says he can do it but the guy at pepboy said its alot of work and he'll charge $240....i really dont want pay $240 for them to install the backs because when i was doing my research everyone on here said it was pretty easy..thanks for any help
#23
Join Date: Jun 2006
Location: SoCal
Posts: 1,084
Likes: 0
Received 0 Likes
on
0 Posts
#28
Join Date: Jun 2006
Location: SoCal
Posts: 1,084
Likes: 0
Received 0 Likes
on
0 Posts