Any one replace their lower ball joints?
I just had my compression rods replaced.
The guy who did the work pointed out that both my lower ball joints were leaking and probably need replacing. Has anyone had this done to their G35? How much should I expect to pay? :icon43: |
Mine are both torn as well...would have to find a replacement and have it pressed in. My searches have come up dry as far as a replacement piece by itself.
|
I bought my new compression rods and they came with ball joints. I also installed them myself, not to hard of a job.
|
^^^ same here... Its not that hard. The only hicup is that you gotta take off the whole cross bar underneath in order to take off the compression rod. Still maybe an hour worth of work if you do it right. No big deal.
My searches have come up dry as far as a replacement piece by itself. |
Originally Posted by lionhb26
(Post 4381769)
^^^ same here... Its not that hard. The only hicup is that you gotta take off the whole cross bar underneath in order to take off the compression rod. Still maybe an hour worth of work if you do it right. No big deal.
riverside infiniti - talk to tony, or search your local junkyards as they will probably give you a good price on used stuff. To the op, I would just buy new compression rods, got both mine shipped for about $427. |
my driver side lower ball joint is torn as well. not the compression rod joints but the lower control arm ball joint that connects to the knuckle. still dont' know what to do about it. it's making alot of noise turning.
|
My G35 AWD front end is riding metal to metal sounds like it is ready to fall apart. I'm told by the dealer it's the compression rods. THey want $800 to replace. Anyone know where I can get the rods aftermarket. My from wheel bearing is also gone and I am looking for aftermarket bearing and hub assembly. Can't find the parts? Can anyone help? Bob
|
SPL parts is making a set of "solid" aluminum bushing for the front lower arm. Bit expensive, but excellent quality.
http://splparts.com/main4/parts/Z33/...PLFLBZ33_1.jpg |
Mesias, are those for where it attaches to the car or where the control arm attaches to the spindle/knuckle? it seems like the lower ball joint that is attached to the knuckle on my car is the one that is torn. but i can't seem to find just that ball joint. i believe it's called a king pin or something.
|
Originally Posted by fast04G
(Post 4384123)
Yea. I was like..crap...i gotta take this cross brace off just to get the compression rods off. And that thing isn't lite either. Lol
To the op, I would just buy new compression rods, got both mine shipped for about $427. |
My bad... these are for the front lower arm not for the compression rods. Sorry about the confusion.
http://splparts.com/main4/parts/Z33/...Suspension.jpg Riverside Infiniti sells in Ebay the revised bushing that attach the compression rod to the chassis but it says that the ball joint it's not sold separately. It only comes with the whole compression rod. Still, I'm sure I saw a thread here where someone posted the part numbers for the bushing and the ball joint. I'll look for it later and I'll post them here. |
The only lower ball joint I see is from the compression rod:
http://i.ebayimg.com/24/!BSDko4gCGk~...i1iJqg~~_1.JPG |
Originally Posted by bpoltzer
(Post 4389089)
My G35 AWD front end is riding metal to metal sounds like it is ready to fall apart. I'm told by the dealer it's the compression rods. THey want $800 to replace. Anyone know where I can get the rods aftermarket. My from wheel bearing is also gone and I am looking for aftermarket bearing and hub assembly. Can't find the parts? Can anyone help? Bob
However if you do wanna save some money, just replace the parts yourself... I did it with the help of a friend and it took like 6 hours to do the complete passenger front suspension (knuckle, comp rod, lower control arm, shock/strut, hub, brakes, and the tie rod).. so only doing the comp rods and hub might take 3 hours... if you take a lunch break haha |
Originally Posted by mesias
(Post 4390972)
Riverside Infiniti sells in Ebay the revised bushing that attach the compression rod to the chassis but it says that the ball joint it's not sold separately. It only comes with the whole compression rod. Still, I'm sure I saw a thread here where someone posted the part numbers for the bushing and the ball joint. I'll look for it later and I'll post them here.
|
|
All times are GMT -4. The time now is 08:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands