I'm looking to upgrade my brakes. I found a great deal on a full 2010 370z rotors, and calipers (non-brembo). Will these bolt on to my 03 rwd sedan? These aren't the big 14" rotors so I doubt I need that special bracket. I'm hoping and guessing that I can just bolt them right on.
12.5" front rotor
2piston front
1piston rear

 

If I had to take a wild guess, I think that you would need the same bracket used for placing the Akebono brakes on earlier model (pre 07) sedans

 

I checked the specs on the non-brembo calipers and rotors. They are the same as the 05-06 sedans. So once I get them...I'll confirm..
Thanks for your feedback.

 

Probably will need the same bracket.

 

2010 370Z does not have Brembo Calipers. The only option for brakes is the Akebono brakes.

 

My buddy just upgraded to G37 calipers and had to use the Z1 bracket.

http://www.z1motorsports.com/350_g35...oducts_id=5332

 

Ok. Well I guess this seller has his info a little mixed up.
Here is the post/sale link with pictures.

http://my350z.com/forum/brakes/57526...ors-lines.html