JisNis,
Thanks for the info. My brother had mentioned that to me, about getting the bolt kit instead for the rear. It's certainly better than spending $800 on a set of stillen camber and toe arms. The fact that these bolts will give you 3 degrees up or down is awesome and that's more than sufficient. I still do need the upper a-arms though and those will be $850. The second link you pasted did not work by the way.
Thanks

yeah the second link didnt work.. so i went into the site itself and tried to find it and didnt have any luck.. the selections for the "infinity" cars were only a g20, i20 and an i35.. but if u look under nissan and go to the 350z section you can find those bolts. are the interchangeable?

yes. As are all other suspension parts.

i would not go with stillen, it a rip off, go to www.kinetixracing.com and the whole kit is $700, front a-arms, rear camber and toe, i have em and i would reccomend it..............

aam6906
the kinetix setup is very well priced, but the control arms do not give me enough room to come within factory specs due to my current setting. the 350evo arms and the stillen are the only ones so far that will give me the necessary room to come back to specs.

JisNis, so you're saying this is all we need to fix our rear camber?

I would also like to know.

depends. please tell us what you're lowered with and if its coils how much

Here's my review a did over a year ago on Tein Basics and camber adjustments. You might find this info useful.

https://g35driver.com/forums/reviews/35796-review-tein-basics-350evo-arms-spc-camber-kit.html