03-04 Non-Brembo Replacement Kit

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Aug 19, 2008 | 03:42 AM
  #31  
GeeDM's Avatar
Registered User
iTrader: (1)
Joined: Dec 2006
Posts: 376
Likes: 1
From: Southern california
^I have had them for a little bit now and i have not experienced any rusting with the rotors....could be because of my location though, and the pads are factory so dust is part of the game with them....but no compromise with stopping power i must say
 
Reply
Old Aug 21, 2008 | 01:23 PM
  #32  
chinabean's Avatar
Registered User
Joined: Nov 2007
Posts: 1,617
Likes: 0
From: gee gee bby bby, Arizona
just picked mine up at scottsdale infiniti this morning, can't wait to put em' on
 
Reply
Old Sep 25, 2008 | 07:43 PM
  #33  
1YoungOwner's Avatar
Registered User
iTrader: (2)
Joined: May 2008
Posts: 464
Likes: 3
From: FAYETTEVILLE NC
Originally Posted by GeeDM
I ordered these and they came very quick...I installed them and i must say that the factory pads with these rotors is a great combo...there is NO noise at all and they look great for aftermarket rotors......awesome combo guys and i would recommend anyone to pic these up...i'll be ordering the rear combo next month!!!!! thanks again!!!
Base on your order was they for a coupe and which rotor set?
 
Reply
Old Sep 26, 2008 | 01:21 PM
  #34  
chinabean's Avatar
Registered User
Joined: Nov 2007
Posts: 1,617
Likes: 0
From: gee gee bby bby, Arizona
mines squeaks again already..wth.
 
Reply
Old Oct 3, 2008 | 03:57 PM
  #35  
blazeplacid's Avatar
Registered User
iTrader: (1)
Joined: Sep 2008
Posts: 1,598
Likes: 15
squeaks dont mean the pads are "bad"
 
Reply
Old Oct 3, 2008 | 07:28 PM
  #36  
chinabean's Avatar
Registered User
Joined: Nov 2007
Posts: 1,617
Likes: 0
From: gee gee bby bby, Arizona
I think its semi metallic, and the lil metal pieces rubbing against the non slotted rotors
 
Reply
Old Dec 2, 2008 | 12:10 PM
  #37  
nicallnet's Avatar
Registered User
iTrader: (1)
Joined: Aug 2008
Posts: 13
Likes: 0
I want to purchase the front and rear kit but I am concerned with rusting. How do they hold up as far as rusting is concerned? Also, is the squeaking mentioned above just an isolated incident or is this a quality issue. Thanks in advance.
 
Reply
Old Dec 2, 2008 | 12:25 PM
  #38  
AARONHL's Avatar
Registered User
iTrader: (15)
Joined: Oct 2007
Posts: 4,334
Likes: 121
From: ɷCONNECTICUTɷ
The rear brake rotors are black next to the wheel hub, so they won't rust. However, I believe the fronts are not painted black so they will rust a little. I'm wondering if we could order a front set in black?
 
Reply
Old Dec 2, 2008 | 02:26 PM
  #39  
chinabean's Avatar
Registered User
Joined: Nov 2007
Posts: 1,617
Likes: 0
From: gee gee bby bby, Arizona
^ yeah my fronts already rusted =/
 
Reply
Old Dec 3, 2008 | 05:40 PM
  #40  
KRoyal's Avatar
Registered User
Joined: Jan 2008
Posts: 121
Likes: 0
From: DFW Area Texas
Originally Posted by AARONHL
The rear brake rotors are black next to the wheel hub, so they won't rust. However, I believe the fronts are not painted black so they will rust a little. I'm wondering if we could order a front set in black?
I was wondering the same thing.... Do you have front rotors that are black? Thanks I'm ready to order as soon as I hear the answer...
 
Reply
Old Dec 3, 2008 | 05:47 PM
  #41  
EverythingG35's Avatar
Thread Starter
|
Former G35driver Vendor
iTrader: (8)
Joined: Feb 2004
Posts: 451
Likes: 0
From: Scottsdale, AZ
Unfortunately, the rotors offered in this kit don't have a coated option.

You could coat them yourself before install or step up to an oem or slotted/cross drilled option, but they're going to be more expensive.


Thanks,
 
Reply
Old Dec 3, 2008 | 05:50 PM
  #42  
KRoyal's Avatar
Registered User
Joined: Jan 2008
Posts: 121
Likes: 0
From: DFW Area Texas
How much more are we talking about? I was on your site yesterday and was priceing out what it would cost for 4 rotors and pads all OEM I wasn't sure why some were more than others because of vague discriptions but could you help me out thanks.
 
Reply
Old Dec 3, 2008 | 06:00 PM
  #43  
EverythingG35's Avatar
Thread Starter
|
Former G35driver Vendor
iTrader: (8)
Joined: Feb 2004
Posts: 451
Likes: 0
From: Scottsdale, AZ
Originally Posted by KRoyal
How much more are we talking about? I was on your site yesterday and was priceing out what it would cost for 4 rotors and pads all OEM I wasn't sure why some were more than others because of vague discriptions but could you help me out thanks.
The difference in price for OEM rotors is due to the size/application (03-04 vs 05+) difference.

03-04 OEM rotors are currently 78.39ea up front and 83.42ea in back.

I also have a slotted option in stock for a bit less than the OEM rotors. They'd be about $75ea up front and $60ea rear.

Those would be something you'd want to order over the phone though.

OEM pads are about $45fr / $38rr

Hope this helps.



Thanks,
 
Reply
Old Dec 3, 2008 | 09:54 PM
  #44  
KRoyal's Avatar
Registered User
Joined: Jan 2008
Posts: 121
Likes: 0
From: DFW Area Texas
So the rotors you talked about in the previous post are both coated with black the OEM and the Slotted... Thanks

Also are these prices shipped or is it +Shipping thanks

Also are the slotted you have in stock of good quality just asking because I got some slotted drilled off ebay and damn like 2 months and they are warped and sound terrabad... So would you suggest going with your setup you have on here and coat myself or go with your slotted setup or go OEM either way i'm ordering from you but what would be my best bet lol... Sorry for all the questions.
 

Last edited by KRoyal; Dec 3, 2008 at 10:25 PM.
Reply
Old Dec 4, 2008 | 02:38 PM
  #45  
kupid915's Avatar
Registered User
Joined: Oct 2008
Posts: 6
Likes: 0
From: NY
I put the front kit on my car about 2 weeks ago. The rotors are already rusting, and the pads, since they are OEM are dusting like crazy. The car is screaming at every traffic stop.
 
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 12:52 AM.