Anyone interested in a KW area meet?
Originally Posted by hullio
Damn Guelph is too far for me to drive
. Have a good time guys.
. Have a good time guys.
???Come on Hullio, the closest meet I ever go to is 1 3/4 hours away and a lot of them are 3 hours away.Get in that X and do what you are supposed to do in it...........DRIVE IT.
Wayne
Originally Posted by GEE35X
What you talkin about Willis.
???
Come on Hullio, the closest meet I ever go to is 1 3/4 hours away and a lot of them are 3 hours away.Get in that X and do what you are supposed to do in it...........DRIVE IT.
Wayne
???Come on Hullio, the closest meet I ever go to is 1 3/4 hours away and a lot of them are 3 hours away.Get in that X and do what you are supposed to do in it...........DRIVE IT.
Wayne
That's a blast from the past!!

So true Hullio. Get in that X and hook up with the boys.
Originally Posted by G-MAN (CANADA)
Sure Ray I know my Bro will bring his Maxima to get done plus others.
Oh got a question for you I noticed the Idle a little rough sometimes since the Timming adv. is that normal?
Oh got a question for you I noticed the Idle a little rough sometimes since the Timming adv. is that normal?
I may have to hook you up again and do the idle relearn, it happens rarely, probably due to the extra mods you have. It may go away as the ECU starts to learn with the new settings. If it hasn't gone away by the time I see you next I'll hook up and do the relearn procedure, or you can use the manual procedure to see if it helps.
3. Start engine and warm it up to normal operating temperature.
4. Turn ignition switch “OFF” and wait at least 10 seconds.
5. Conform that accelerator pedal is fully released, turn ignition switch “ON” and wait 3 seconds.
6. Repeat the following (steps 7a, 7b) procedures quickly five times within 5 seconds.
7a. Fully depress the accelerator pedal (HARD)
7b. Fully release the accelerator pedal.
8. Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 20 seconds until the Check Engine Light (CEL) stops blinking and turned ON.
9. Fully release the accelerator pedal within 3 seconds after the CEL is ON.
10. Start engine and let it idle.
11. Wait 20 seconds.
12. Rev up the engine two or three times and make sure the idle speed and ignition timing are within the specifications.
A convoy to Guelph sounds good to me. Just let me know when and where.
btw G-MAN, thanks for the mothers day reminder. You saved me some serious embarrassment on the home front.
Paul
btw G-MAN, thanks for the mothers day reminder. You saved me some serious embarrassment on the home front.
Paul
Originally Posted by rpm&my_G35
A convoy to Guelph sounds good to me. Just let me know when and where.
btw G-MAN, thanks for the mothers day reminder. You saved me some serious embarrassment on the home front.
Paul
btw G-MAN, thanks for the mothers day reminder. You saved me some serious embarrassment on the home front.
Paul
no problem.Ray I'll give it a try but last time I tried to do that I couldn't get it.
Joined: Jun 2002
Posts: 30,341
Likes: 9
From: Cambridge, Ont. Canada
Originally Posted by whatacar
WHS X 6. The G's such a blast to drive. If the meet is going to be in Guelph, anyone wanna hook up and convoy over to where ever?
C.
Originally Posted by G-MAN (CANADA)
OK how about either Sat around 12pm or Mon at the same time? cmon guys we need to agree on a day and time.




