Looks great.


I had to get the 18% on the M taken off the fronts. I couldn't get it passed for the inspection otherwise. I'm going to get 50% put back on there to try and keep it more inconspicuous to the PoPo.

 

Boom goes the dynamite!!!

 

20% is pretty dark. I have that for the rear window of my sedan but 30% on the sides.

You might run into issues with the PoPo using 20%.

It shouldn't be more that a couple of hours if the shop has done a few G's beforehand.

 

just came from Simone, i had a grinding noise in the center turns out its the heat shield was lose, i also tightened the belt, adjust my front brakes (they are done, getting OEM parts with rotors and pads next week) changed my cabin filter (it wasnt that bad, no creatures inside)
and my engine cover was lose, they did re-stick that one in no need for new one.

next thu its front brakes and rotors. i think its gonna cost me around 400 bucks parts plus labor .

 

Awesome thread, definitely heading there for my next change which is actually due soon. Downtown Infiniti lives up to the stealership name.

 

btw steve the previous mechanic is gone, now there is a new guy Albert, really enthusiastic about his job has tons of experience. and he is fast.

 

Albert serviced my brakes. He knew what he was doing.

 

I got a SIMONE PERFORMANCE WIND BREAKER. that is as much as I can relate to the shop since the 60K drive is a bit too much personally... but during the meet.. the folks there were very kind and helpful regarding G35 coupe questions.

 

^ 60K? as in 60 Kilometers? that's a walk in the park. And any reason to drive your G is a good reason! No?

 

^not really, I think driving 60KM is tad much as there are numerous shops in the GTA

If Simone's was in GTA hands down i would be taking my car there nothing but good reviews...

 

I must agree, Simone is a little too out of my way. I get all my work done at Advance Power House, they are real good.

 

I had a problem with my clutch.. long story short I could not take it to SPI, but I called Vic to make sure the other shop was doing the right thing. I cross checked with him and he verified. He will also help you out if you are doing some DIYs. I'm taking my car there end of this month for an alignment and checkup.

 

i bought my lowering springs and camber arms from Vic, i installed them myself but went back for the alignment.

They treated me well.