Spring Mod Thread - 2011 - Canada
Ahh lets see...
xxr 521s in near extinct silver (a week or two)
ichiba spacers front and rear (month or two)
some type of camber kit front and rear (undecided)
ordering springs this week (thinking of 350z tein s-techs)
Neo chrome extended lug nuts (month or two)
Jdm Battery cover (early spring)
LEDs just installed today (clock and key ring)
New tires for fronts (Falken 452s)
Just installed new Gator Belts (both drive and ac)
Rear brake pads (undecided)
Mishimoto rad hose kit
T-bolt clamps for hose kit from Princess Auto (3 weeks)
MD Plenum spacer 5/16 iso thermo copper (Bday wishlist)
KP technologies navi box and foglight box.
That should tie me over until the spring! haha!
xxr 521s in near extinct silver (a week or two)
ichiba spacers front and rear (month or two)
some type of camber kit front and rear (undecided)
ordering springs this week (thinking of 350z tein s-techs)
Neo chrome extended lug nuts (month or two)
Jdm Battery cover (early spring)
LEDs just installed today (clock and key ring)
New tires for fronts (Falken 452s)
Just installed new Gator Belts (both drive and ac)
Rear brake pads (undecided)
Mishimoto rad hose kit
T-bolt clamps for hose kit from Princess Auto (3 weeks)
MD Plenum spacer 5/16 iso thermo copper (Bday wishlist)
KP technologies navi box and foglight box.
That should tie me over until the spring! haha!
Last edited by jdm_dudebro; Jan 10, 2011 at 12:01 AM. Reason: *update and corrections
A custom COBB tune would be very similar to a custom up-rev tune.
Last edited by Sylvan lake V35; Jan 13, 2011 at 06:28 PM.
Very nice. I hope you got the "complete" kit. Mine hasn't been shipped yet but should be soon. No rush anyhow.
I had an arrival today too... cool carbons F&R. The boss didn't know about that so had to wing it.
I also worked something out so my RE exhaust goods will be arriving via Nissan Frontier.
There might be room for a few more goodies. 
I had an arrival today too... cool carbons F&R. The boss didn't know about that so had to wing it.
I also worked something out so my RE exhaust goods will be arriving via Nissan Frontier.
There might be room for a few more goodies. 
Joined: Jan 2004
Posts: 21,095
Likes: 47
From: Toronto, GTA north
I'll talk to you more about the CCs when you install them.
^sounds good. Pad backing are pretty interesting looking colour. The compound certainly feels aggressive to the touch. Wonder about how much extra noise and are they ok cold?
Going to do the pads, lines & camber shims early spring....might consider the changing the engine mount bolts then too. After that will move to the shifter kit, reposition the trans mounts, new xpipe and cans. Oil and diff fluid will fit in there sometime too.
Probably will do the front reflectors too. If I'm happy the rears might be done as well. Would like to remove front bumper and rid it of both the chips and the sprayers but doubt that will happen- at least in '11.
Going to do the pads, lines & camber shims early spring....might consider the changing the engine mount bolts then too. After that will move to the shifter kit, reposition the trans mounts, new xpipe and cans. Oil and diff fluid will fit in there sometime too.
Probably will do the front reflectors too. If I'm happy the rears might be done as well. Would like to remove front bumper and rid it of both the chips and the sprayers but doubt that will happen- at least in '11.
^ I only got tools 
Hours before I flew to california ( that's right your cold mother ****ers) I picked up the faces for my wheels (they were being bored out to fit a 66.1 hub bore)
Hours before I flew to california ( that's right your cold mother ****ers) I picked up the faces for my wheels (they were being bored out to fit a 66.1 hub bore)
F U it has been -25 here all week and close to -35or40 with the wind chill
. Let's see some parts boys I know some of you were taking pictures of some yesterday
All right just to shut up Gord.
AME Tracers 18x10 +25 for my R32 GTR
DSS Pro Axles for the G
3.3 VLSD pumpkin for the G
Some more parts to come yet.Will post as they come in.
AME Tracers 18x10 +25 for my R32 GTR
DSS Pro Axles for the G
3.3 VLSD pumpkin for the G
Some more parts to come yet.Will post as they come in.
Last edited by red35; Jan 17, 2011 at 01:00 AM. Reason: Updated offsets
not exactly spring but some beginning of summer ideas(mostly cosmetic mods, not huge budget):
-im gonna head europe to see my family anyways so i'm gonna try to see if i can get a custom AKRAPOVIC exhaust for the G (unfortunately they have made one for 370z, but im gonna check out to see if it can fit the G, normally they are known for motorcycle exhaust but its worth a shot) worse case REMUS exhaust.
-powdercoat stock wheels, matte black.(or g37 wheels)
-small chance but matte 3m all around.
-change taillights and old 2003 headlights.
-mild tint
i dont foresee any engine mods, cops are everywhere in toronto, stock is enough
these are ideas, depends on my tax return and how much i can save till summer.
-im gonna head europe to see my family anyways so i'm gonna try to see if i can get a custom AKRAPOVIC exhaust for the G (unfortunately they have made one for 370z, but im gonna check out to see if it can fit the G, normally they are known for motorcycle exhaust but its worth a shot) worse case REMUS exhaust.
-powdercoat stock wheels, matte black.(or g37 wheels)
-small chance but matte 3m all around.
-change taillights and old 2003 headlights.
-mild tint
i dont foresee any engine mods, cops are everywhere in toronto, stock is enough
these are ideas, depends on my tax return and how much i can save till summer.
