tint problem - solved!
#1
tint problem - solved!
this is an awesome site with a great community of people. thank you all for your advice!!!!!!!!! my new post is to give everyone my full on recommendation of wil's work.
i took up wil's offer on him taking a look at the tint early this morning. it turned out the bubbles i were mentioning were in fact dust particles on the tint. i took the whole day off from work just so that i could watch the whole process of the redo to make sure there are no more problems!!!!!!!!!!! i know it sounds like i am an *** about this, but with my previous experience, i couldn't trust anyone.
wil was more than accommodating despite his "employee only area" sign. i sat there and watched him for a full 5 hours. he was able to pull the tint off in one piece and show me all the dust specs on the tint. if anyone here ever get a chance to watch wil tint, i am sure all of you would agree that he is very good at what he does - a perfectionist in my eyes. he was careful with getting the interior wet and had towels laid on the rear deck and wiped up excessive water frequently. he finished my tint in about two hours including my driver's side door and did an excellent job. there were no bubbles and he tinted right over the dot matrix with no problem.
i was so impressed with the tint job that i decided to have him apply xpel onto my car. he cut the film in his office with his own machine and had the clearbra installed in three hours. in certain angles, i cannot see the line at all on the hood. if i move away from the car about four feet away, there is absolutely no visual line whatsoever.
i am now very satisfied with my car. funny i was thinking about selling it for all the problems with the tint!!!! now i can't stop looking at my g in my garage.
thanks wil.
i took up wil's offer on him taking a look at the tint early this morning. it turned out the bubbles i were mentioning were in fact dust particles on the tint. i took the whole day off from work just so that i could watch the whole process of the redo to make sure there are no more problems!!!!!!!!!!! i know it sounds like i am an *** about this, but with my previous experience, i couldn't trust anyone.
wil was more than accommodating despite his "employee only area" sign. i sat there and watched him for a full 5 hours. he was able to pull the tint off in one piece and show me all the dust specs on the tint. if anyone here ever get a chance to watch wil tint, i am sure all of you would agree that he is very good at what he does - a perfectionist in my eyes. he was careful with getting the interior wet and had towels laid on the rear deck and wiped up excessive water frequently. he finished my tint in about two hours including my driver's side door and did an excellent job. there were no bubbles and he tinted right over the dot matrix with no problem.
i was so impressed with the tint job that i decided to have him apply xpel onto my car. he cut the film in his office with his own machine and had the clearbra installed in three hours. in certain angles, i cannot see the line at all on the hood. if i move away from the car about four feet away, there is absolutely no visual line whatsoever.
i am now very satisfied with my car. funny i was thinking about selling it for all the problems with the tint!!!! now i can't stop looking at my g in my garage.
thanks wil.
#3
#4
Re: tint problem - solved!
Glad to help out a fellow board member. Just pm me if there's anything else I could help you with. Thanks!
Certified Window Tint & Detailing Specialist
3M / VentureShield Paint Protection Film Dealer
Madico Window Film Dealer
syu@machiii.net
2003 AT Sedan / 2004 6MT Coupe
Certified Window Tint & Detailing Specialist
3M / VentureShield Paint Protection Film Dealer
Madico Window Film Dealer
syu@machiii.net
2003 AT Sedan / 2004 6MT Coupe
#6
Thread
Thread Starter
Forum
Replies
Last Post
Mad A
Not G35 Related
4
12-08-2015 01:45 PM
JG_G35
Engine - Intake/Fuel
2
09-07-2015 09:35 PM