Dent!!!! Please Help!!!
whats up guys
ok i was in jersey city left my car parked in a parking loting thinking it would be safe. (YEAH RIGHT) sooo today when i was dusting my car off i felt a bump, when i turned my head to see what it was. BAM!!!!! the biggest DENT EVER. Im SOooo Pissed! the good thing is that there was no paint chipping or scratches. i need help on repairing. has any 1 used the DING KING?? and if so how did it work, how were the results
PLEASE ANYTHING WILL HELP!!1
here are pics
www.picturetrail.com
on the top where is has member seach put Infamous_g35
thanks for any kind of help
ok i was in jersey city left my car parked in a parking loting thinking it would be safe. (YEAH RIGHT) sooo today when i was dusting my car off i felt a bump, when i turned my head to see what it was. BAM!!!!! the biggest DENT EVER. Im SOooo Pissed! the good thing is that there was no paint chipping or scratches. i need help on repairing. has any 1 used the DING KING?? and if so how did it work, how were the results
PLEASE ANYTHING WILL HELP!!1
here are pics
www.picturetrail.com
on the top where is has member seach put Infamous_g35
thanks for any kind of help
Last edited by InFaMOuS_G; Feb 17, 2005 at 07:46 PM.
You should have it professionally removed. The glue pullers don't work well especially if you want it back to normal. The glue pullers can pull some of it out and at times, can create what we pdr techs call "high-spots", which will require a professional to "hammer" it back down.
Dent repairs can cost anywhere from $80-$300 depending on size, location, and depth of the dent. To gauge whether or not the dent could be completely removed, just do some measurements yourself. If the dent's depth is more than half the diameter of the dent, then the metal is stretched....stretched metal can never go back to its original shape. Hope this helps.
Dent repairs can cost anywhere from $80-$300 depending on size, location, and depth of the dent. To gauge whether or not the dent could be completely removed, just do some measurements yourself. If the dent's depth is more than half the diameter of the dent, then the metal is stretched....stretched metal can never go back to its original shape. Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
poktanG35
Engine - Exhaust
23
Oct 26, 2015 03:32 AM



