What is your next mod going to be?
#31
12-06-2007 | 02:42 PM
Originally Posted by timsam
I just live out my dreams by seeing yalls cars!
I couldn't have said it better! Mine's a daily driver, if I could just get some damn wheels and lower it a bit i'd be REALLY happy! But i'm moving out of state soon, so it will have to wait a while more...Looking at some of the cars on this site keeps me going though!
#35
12-06-2007 | 04:23 PM
Oh that just reminded me ... I still need to do a oil catch can with tubing that will not close due to the vacuum of the blower!! What are you going with Moog? The impeller on my blower is covered in oil, I'm afraid to see what it looks like inside the plenum!
Also I've wanted to do a strut tower stabilizer bar but wasn't sure if any of them would fit over my intake and plenum with 1/2" spacer. Moog, what STB do you have?
Also I've wanted to do a strut tower stabilizer bar but wasn't sure if any of them would fit over my intake and plenum with 1/2" spacer. Moog, what STB do you have?
#36
12-11-2007 | 04:07 PM
Originally Posted by BeerViper
Oh that just reminded me ... I still need to do a oil catch can with tubing that will not close due to the vacuum of the blower!! What are you going with Moog? The impeller on my blower is covered in oil, I'm afraid to see what it looks like inside the plenum!
Also I've wanted to do a strut tower stabilizer bar but wasn't sure if any of them would fit over my intake and plenum with 1/2" spacer. Moog, what STB do you have?
Also I've wanted to do a strut tower stabilizer bar but wasn't sure if any of them would fit over my intake and plenum with 1/2" spacer. Moog, what STB do you have?
#38
12-11-2007 | 04:40 PM
Tein Basics, SPC F & R Camber arms, V2 Strut Bar, NRG Hood Shocks are going in on Monday. I'm replacing my end links as well due to the fact that two of the originals snapped after I installed my Stillen sways. I'm also replacing my compression rods with the OEM revised.
I need a new front bumper so I'll be looking for an 06 OEM Sport bumper to replace it with and if I can swing it, I'll try to pick up a set of 06 projectors to install while I have the bumper off.
I need a new front bumper so I'll be looking for an 06 OEM Sport bumper to replace it with and if I can swing it, I'll try to pick up a set of 06 projectors to install while I have the bumper off.
#39
12-11-2007 | 05:19 PM
Originally Posted by BeerViper
Oh that just reminded me ... I still need to do a oil catch can with tubing that will not close due to the vacuum of the blower!! What are you going with Moog? The impeller on my blower is covered in oil, I'm afraid to see what it looks like inside the plenum!
Also I've wanted to do a strut tower stabilizer bar but wasn't sure if any of them would fit over my intake and plenum with 1/2" spacer. Moog, what STB do you have?
Also I've wanted to do a strut tower stabilizer bar but wasn't sure if any of them would fit over my intake and plenum with 1/2" spacer. Moog, what STB do you have?
I have a Top Speed catch can with 5/8” fuel line tubing I got from Autozone. It doesn’t collapse under vacuum like the tubing it came with does. The catch can I had did collect a few tablespoons of oil in the month or so I had it on there. I just put metal mesh into the body of the catch can for the oil vapor to collect on, and it’s collected about a tablespoon in about a week! Inside the plenum is pretty frickin dirty from what I remember when I installed my spacer.
I have a Richie STB that fits with the Skunk2 5/8” spacer.
#40
12-11-2007 | 05:57 PM
#41
12-11-2007 | 05:59 PM
Originally Posted by Moog
Sorry Beerviper…
I have a Top Speed catch can with 5/8” fuel line tubing I got from Autozone. It doesn’t collapse under vacuum like the tubing it came with does. The catch can I had did collect a few tablespoons of oil in the month or so I had it on there. I just put metal mesh into the body of the catch can for the oil vapor to collect on, and it’s collected about a tablespoon in about a week! Inside the plenum is pretty frickin dirty from what I remember when I installed my spacer.
I have a Richie STB that fits with the Skunk2 5/8” spacer.
I have a Top Speed catch can with 5/8” fuel line tubing I got from Autozone. It doesn’t collapse under vacuum like the tubing it came with does. The catch can I had did collect a few tablespoons of oil in the month or so I had it on there. I just put metal mesh into the body of the catch can for the oil vapor to collect on, and it’s collected about a tablespoon in about a week! Inside the plenum is pretty frickin dirty from what I remember when I installed my spacer.
I have a Richie STB that fits with the Skunk2 5/8” spacer.
