Hey guys im getting some work done on my car wanted to replace the window motor while the door was apart.

Any ideas on what the part number is or a place where I can get one for a decent price for an 04 coupe?

cheapest ive seen is on amazon for roughly 100 or less problem is I cant confirm if the part number is correct.

Also looking for Nitto if possible tires 275 30 20 I have NTSSS on the front so im doing my best to match.

Tires ---> http://dallas.craigslist.org/dal/pts/2374559984.html (unless you want name brand)

Window motor - hit up R1forever80 or G35man04 - they can either clean the motor or swap it out for you..

vatozone and oreilly carry them if you want new...I think they are 130 or so.. and I believe they have lifetime warranty..

Acid you are the ****ING man thank you so much I was hoping come one would respond soon lol The best I came up with was some parts geek spot online 102 for a reman. and tires I was just fubar couldnt dind any on c list.

Yeah I know quite a few folks got their window motors at autozone.. I think I'mma just give in and get one too.. Getting it cleaned every few weeks is getting old..

^heard that. Wish I had 130 to spend on a window motor. Im getting sick of cleaning it

Has anyone had repeat issues that you've hears of? I'm thinking about going with the oriellys over autozones

even if you do - lifetime warranty - take it back and get another new one..


Done and DONE..

Yea it was getting out of hand I had to pull it back up every freaking time. Its embarrassing to at a drive through or a chick is checking you out, then its all

"Hey look how fly I am pulling up the window with my hand on my luxurious vehicle"

^^^or banging on the door and pray it moves...

AHAHAHAHAHAHAHAHAHA!!!

we all have been there..

^yup.. that's me.. BANGING the door...

^lmao....knock on wood no issues here!

Oh it WILL happen.. Nissan didn't make window motors w/ vents so that the carbon could fall out, so it clogs the motor.. EVERY car eventually has this problem.. So it's only a matter of time bro.. I know people on their 5th motor..

Most folks got it done when the car was still under warranty..

Thank you for the insight....now I know what the issue is I will breaak out the dremel and make my own vents for the carbon to fall out lol!

I found some used pirelli tires as a stop gap im going from 275/30/20 to 285/30/20, is that jump from 275-285 a big deal? My car is stock no drop. Im getting them for $80 total.

PS: and the rim is 10 and 3 quarter inch wide rim.

You have no drop? Then you DEFINITELY won't have a problem. You should be good to go man.. I'm running a 285 on a 10" wheel and I'm low, you've seen my wheels and tires.. so that means I have more meat to contact the side of my fender than you will (being so close to an 11" wheel, it'll be a little more stretched than mine).. If you wanted to be 100% safe, you could get your fenders rolled in the rear just to be safe.. Mine are completely flat, but like I said, I'm lowered pretty low on 20s.

The new tires I acquired for my venacis (11" wide wheel in rear) are going to be a 275 because I want it semi stretched..