FS: New BC stage 2 complete cam set
#1
Join Date: May 2007
Location: Boston
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
New BC stage 2 complete cam set
I have a set of BC stage 2 cams Im letting go, retail is about 1000 to 1200.
Dont want to have to tear the motor down again for install.
My lose is your gain... will throw in a set of bc valve springs and retainers for another 100$ to make it complete.... pm me if interested sorry but i dont really check the boards to much these days....
Dont want to have to tear the motor down again for install.
My lose is your gain... will throw in a set of bc valve springs and retainers for another 100$ to make it complete.... pm me if interested sorry but i dont really check the boards to much these days....
#5
#6
I have a set of BC stage 2 cams Im letting go, retail is about 1000 to 1200.
Dont want to have to tear the motor down again for install.
My lose is your gain... will throw in a set of bc valve springs and retainers for another 100$ to make it complete.... pm me if interested sorry but i dont really check the boards to much these days....
Dont want to have to tear the motor down again for install.
My lose is your gain... will throw in a set of bc valve springs and retainers for another 100$ to make it complete.... pm me if interested sorry but i dont really check the boards to much these days....
#7
Join Date: May 2007
Location: Boston
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for the late reply
yes to swap out cams u have to tear down the front of the motor. It's not that complicated if u have mechanical skills.
Can be done over a weekend. Also with the stage 2 cams u realy don't have to swap out the valve springs unless u plain on upping the redline past the stock setting, this will save a lot of time and headache's. The valve springs can be replaced without having to remove the heads it's time consuming but can be done.
Also no these cams r for a non rev up sorry...
yes to swap out cams u have to tear down the front of the motor. It's not that complicated if u have mechanical skills.
Can be done over a weekend. Also with the stage 2 cams u realy don't have to swap out the valve springs unless u plain on upping the redline past the stock setting, this will save a lot of time and headache's. The valve springs can be replaced without having to remove the heads it's time consuming but can be done.
Also no these cams r for a non rev up sorry...
Last edited by ben0878; 04-25-2012 at 12:25 AM.
Trending Topics
#8
Join Date: May 2007
Location: Boston
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Power gains around 40 hp not sure about torque? But it realy opens up and changes the overall performance of the car. I'm running the stage 3 bc cams never ran a dyno for before and after so I couldn't tell u for sure what hp gains they say 75. But my g is also fi so it pulled even before I built the motor.
![Wink](https://g35driver.com/forums/images/smilies/wink.gif)
#10
#12
Join Date: May 2007
Location: Boston
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
#13
dzaltima/ Dex got first dibs waiting to see if he's serious.... will get back with update if there's no sale..... again these things have been sitting in my living room for almost a yr i'm running the stage 3's and have no use for them, i just want to see them go to a good home ![Smilie](https://g35driver.com/forums/images/smilies/smile.gif)
![Smilie](https://g35driver.com/forums/images/smilies/smile.gif)
#15
Join Date: May 2007
Location: Boston
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts