Car got dyno'd today...
Originally Posted by kyu1021
does anyone know if these are made vehicle specific, or they are only listed that way on ebay because of instructions.
Registered User
Joined: Dec 2006
Posts: 547
Likes: 1
From: SIoux Falls SD
Originally Posted by mr freeze
not that i know of..you can or i can help you with the wiring instructions if needed...also to alex..sorry man iv'e been busy wit hmy new project..custom stereo install and watching the ravens get that *** beat,"go colts" i promise i will go through the setting and post them for you...
thanks
Originally Posted by mr freeze
went down to je performance today to have my apexi afc2 tuned to my mods..james"the owner and nissan tuning guru" went to work on my 06 coupe ..the mods i have done are.motordyne 5/16" spacer, fujita short ram air intake,and injen track editon true dual exhaust.needless to say i was very very please with the final outcome of the tune...i dyno'd stock 224hp and 211 ftlbs of trq. after 3 baseline pulls on the dyna pack..then james went to work with his majick...after tuning 266.3 hp and 228.9 ft lbs of trq..with a/f ratio right on the mark..i can deff feel a big diff in mid to top range power..i just wish i could find a way to make more trq..
how come no mrev2?
where is je performance at?
i'm very impressed with your numbers.
i was thinking about going to technosquare. i hear good things about them, but je sounds cool too.
do you know if there is a way to put in the afc neo?
i got it at the apexi garage sale and when i open the manual it does list the vq35de as compatible.
Joined: Feb 2006
Posts: 13,068
Likes: 101
From: Southern Cali --> 818
Originally Posted by Chrlesmd
Aren't those stock numbers low for an 06 coupe? I thought I remembered the 03-04 coupes were putting down very similar numbers. 5AT?
I dynoed at 265hp & 245tq on a Dynopack.
Was this done on a Dynojet or Dynopack?
Eitherway, the gains are very impressive.
Don't be misled by the stock baseline dyno.
.
Is your car an Auto or 6 speed... from the looks of the dyno i assume an auto? If its auto i should be putting down the same numbers as you considering i have the same exact mods, but i believe i was the first with the AFCII now everyone is going to have it which means i need to buy something new! 
Nice numbers though!
-sean
Nice numbers though!
-sean
Originally Posted by skaterbasist
Depends on many factors.
I dynoed at 265hp & 245tq on a Dynopack.
Was this done on a Dynojet or Dynopack?
Eitherway, the gains are very impressive.
Don't be misled by the stock baseline dyno.
.
I dynoed at 265hp & 245tq on a Dynopack.
Was this done on a Dynojet or Dynopack?
Eitherway, the gains are very impressive.
Don't be misled by the stock baseline dyno.
.
Registered User
Joined: May 2003
Posts: 824
Likes: 0
From: Millersville, MD
I don't know what my bone-stock baseline was, but my 04 measured 238 whp (on JE's dynapack) with intake, exhaust, and spacer mods. I had James install and tune my SAFC and I left there with 253 to the wheels...
Thread
Thread Starter
Forum
Replies
Last Post
Tolboothwilley™
Exterior-Vendor
6
Jul 28, 2016 12:42 AM
