Engine, Drivetrain & Forced-Induction Have Technical Questions or Done Modifications to the G35? Find out the answer in here! (View All Posts)
Sponsored by:
Sponsored by: CARiD

Car got dyno'd today...

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 01-11-2007 | 09:29 PM
mr freeze's Avatar
Thread Starter
|
Registered User
iTrader: (9)
Joined: Jul 2006
Posts: 276
Likes: 0
Car got dyno'd today...

went down to je performance today to have my apexi afc2 tuned to my mods..james"the owner and nissan tuning guru" went to work on my 06 coupe ..the mods i have done are.motordyne 5/16" spacer, fujita short ram air intake,and injen track editon true dual exhaust.needless to say i was very very please with the final outcome of the tune...i dyno'd stock 224hp and 211 ftlbs of trq. after 3 baseline pulls on the dyna pack..then james went to work with his majick...after tuning 266.3 hp and 228.9 ft lbs of trq..with a/f ratio right on the mark..i can deff feel a big diff in mid to top range power..i just wish i could find a way to make more trq..


 
  #2  
Old 01-11-2007 | 09:32 PM
Mark350GT's Avatar
Registered User
iTrader: (3)
Joined: Feb 2005
Posts: 1,842
Likes: 0
From: Dallas, Texas
thats a big difference. nice!
 
  #3  
Old 01-11-2007 | 09:34 PM
s2k_g35's Avatar
Registered User
iTrader: (2)
Joined: Nov 2006
Posts: 232
Likes: 0
266 very impresive. I am getting my MD Spacer install next week and dyno. I'll post the before and after results here soon.
 
  #4  
Old 01-11-2007 | 09:45 PM
infinitialex's Avatar
Registered User
Joined: Dec 2006
Posts: 547
Likes: 1
From: SIoux Falls SD
can you please post Safc settings just for referances?
 
  #5  
Old 01-11-2007 | 09:53 PM
infinitialex's Avatar
Registered User
Joined: Dec 2006
Posts: 547
Likes: 1
From: SIoux Falls SD
o and do you have AFR graph? Please post it I would love to see what they have corrected..

Thanks
 
  #6  
Old 01-11-2007 | 10:00 PM
mr freeze's Avatar
Thread Starter
|
Registered User
iTrader: (9)
Joined: Jul 2006
Posts: 276
Likes: 0
Originally Posted by infinitialex
can you please post Safc settings just for referances?

i dont have the setting off hand as i would have to scroll through and see what the settings are..also i don't have the a/f graph on hand..but if i recall it was running around 13-13.5 at peek
 
  #7  
Old 01-11-2007 | 10:03 PM
infinitialex's Avatar
Registered User
Joined: Dec 2006
Posts: 547
Likes: 1
From: SIoux Falls SD
Ok please look at your SAFC setting for high and low throtlle points at different RPM's
I woudl love to know this info to see how much corection is posible on these cars.......
Please let me know and Im sure others would love to see this info too,...
Thanks
 
  #8  
Old 01-11-2007 | 10:04 PM
mr freeze's Avatar
Thread Starter
|
Registered User
iTrader: (9)
Joined: Jul 2006
Posts: 276
Likes: 0
Originally Posted by infinitialex
Ok please look at your SAFC setting for high and low throtlle points at different RPM's
I woudl love to know this info to see how much corection is posible on these cars.......
Please let me know and Im sure others would love to see this info too,...
Thanks

sure man, no problem
 
  #9  
Old 01-11-2007 | 10:11 PM
infinitialex's Avatar
Registered User
Joined: Dec 2006
Posts: 547
Likes: 1
From: SIoux Falls SD
can u look now Im dying to find out?
 
  #10  
Old 01-11-2007 | 10:26 PM
mr freeze's Avatar
Thread Starter
|
Registered User
iTrader: (9)
Joined: Jul 2006
Posts: 276
Likes: 0
Originally Posted by infinitialex
can u look now Im dying to find out?

well besides it being about 25 degress outside..i would have to go out to my car and scroll through it..sorry man but you'll have to wait till tomm..
 
  #11  
Old 01-11-2007 | 10:46 PM
jdmeg21's Avatar
Registered User
iTrader: (8)
Joined: Jan 2006
Posts: 1,544
Likes: 3
damn, nice to finally see someone post results after using the afc2. How much did the afc2 cost you. I'm wondering if I should get that or the greddy emanage blue.
 
  #12  
Old 01-11-2007 | 10:57 PM
mr freeze's Avatar
Thread Starter
|
Registered User
iTrader: (9)
Joined: Jul 2006
Posts: 276
Likes: 0
i bought the apexi safc 2 from another forums member for 120 bucks...you can get them for around 280 on e-bay...
 
  #13  
Old 01-13-2007 | 06:39 PM
infinitialex's Avatar
Registered User
Joined: Dec 2006
Posts: 547
Likes: 1
From: SIoux Falls SD
so we are the promised number man?
 
  #14  
Old 01-13-2007 | 08:05 PM
JEVERYDAY's Avatar
Registered User
iTrader: (3)
Joined: Mar 2005
Posts: 1,926
Likes: 2
From: LONG ISLAND, NEW YORK
Nice !
 
  #15  
Old 01-13-2007 | 09:06 PM
kyu1021's Avatar
Registered User
iTrader: (6)
Joined: May 2003
Posts: 441
Likes: 0
From: Northern NJ
does anyone know if these are made vehicle specific, or they are only listed that way on ebay because of instructions.
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 08:06 AM.