Finished Engine Project :)
#17
Joined: Dec 2006
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
From: Berwyn, Pa
Sorry I havent got around to answering questions I have been rea busy at work lately and havent had too much time on the car or on the forum.
Pics will be posted tomorrow.
I am not going to do a dyno right now, I will do that after I buy the tranny and half shafts.
For you guys that want to do a DYI on building and engine, it is a lot of work! However I might do a writeup someday, after I get everything back together and I have some free time, BUT if anyone wants to go ahead and give it a shot PM me and I will walk you through the steps and answer any questions that I can. I can give you my cell number and would be more then happy to help anyone out. Just remeber it can get very frusterating and A LOT of work but the fact that you know you built your own engine and it runs is an AWESOME feeling!!
EDIT:
Also guys do your research!!! Just b/c my engine has this, that, and this doesn't mean that it is right for your engine. I mean I can give you pointers and stuff but make sure you make your engine yours!!
Also I am not quite sure on the power output on this, but I have a tune for 12 and 15 pounds so we will see what will happen!!
PM me guys for any questions I would be more then happy to help anyone out!
Pics will be posted tomorrow.
I am not going to do a dyno right now, I will do that after I buy the tranny and half shafts.
For you guys that want to do a DYI on building and engine, it is a lot of work! However I might do a writeup someday, after I get everything back together and I have some free time, BUT if anyone wants to go ahead and give it a shot PM me and I will walk you through the steps and answer any questions that I can. I can give you my cell number and would be more then happy to help anyone out. Just remeber it can get very frusterating and A LOT of work but the fact that you know you built your own engine and it runs is an AWESOME feeling!!
EDIT:
Also guys do your research!!! Just b/c my engine has this, that, and this doesn't mean that it is right for your engine. I mean I can give you pointers and stuff but make sure you make your engine yours!!
Also I am not quite sure on the power output on this, but I have a tune for 12 and 15 pounds so we will see what will happen!!
PM me guys for any questions I would be more then happy to help anyone out!
Last edited by 88G35; 12-09-2007 at 08:03 PM.
#18
Joined: Dec 2006
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
From: Berwyn, Pa
Here are a couple of pics guys that I found. Unfortunatly I lost some of the pictures on my build up, my computer crashed and I lost them SORRY!! I will take some pics in that car and everything. But here are few when I put the engine in the back and took off the covers and everything to show what has been going on.
Oh yea don't mind that pink cover haha
Oh yea don't mind that pink cover haha
Thread
Thread Starter
Forum
Replies
Last Post
Tolboothwilley™
Exterior-Vendor
6
07-28-2016 12:42 AM
Phenomenon9
Engine, Drivetrain & Forced-Induction
3
08-09-2015 01:34 AM