HKS Camshafts for Non Rev-up VQ35DE (+32whp and +23lb-ft for FI)
Joined: Sep 2006
Posts: 496
Likes: 0
From: -North Hollywood, SoCal-
HKS Camshafts for Non Rev-up VQ35DE (+32whp and +23lb-ft for FI)
I found this at: http://www.hksusa.com/info/?id=3441 so I thought I would share with you guys.
Personally, I have never seen a set of camshafts made this much of power before (F-Con?). I'm a Rev-up dude so I'll have you guys with Non Rev-up experience this first.
JJ
Originally Posted by HKS
HKS, the leader in Premium Driving Performance products, introduces camshafts for the 2003-2006 Nissan 350Z and Infiniti G35C non rev-up VQ35DE Engine. Through extensive research and testing, HKS engineers developed an all-new camshaft set to work seamlessly with the variable valve timing found in the Nissan and Infiniti VQ35DE power plant. The new camshaft set features 264° of duration and 10.5mm of lift on the intake camshaft and 264° duration and 10.2mm of lift on the exhaust camshaft. With proper tuning, an improved power output can be seen at higher rpm ranges. Both intake and exhaust camshafts are compatible with the factory VQ35DE (non rev-up) valve train.
HKS camshafts were installed and tested on a 2003 Nissan 350Z equipped with a HKS Prototype GT Supercharger Pro Kit (8.5 PSI pulley), Low compression pistons, 680cc injectors and tuned with the HKS F-con V-pro on 91 octane fuel. Peak power and torque increased 32 RWHP and 23 lb-ft, respectively, pushing the supercharged 350Z from 380.0WHP to 412.2WHP and 328.8 lb-ft to 351.7 lb-ft at 6,800RPMs.
HKS camshafts were installed and tested on a 2003 Nissan 350Z equipped with a HKS Prototype GT Supercharger Pro Kit (8.5 PSI pulley), Low compression pistons, 680cc injectors and tuned with the HKS F-con V-pro on 91 octane fuel. Peak power and torque increased 32 RWHP and 23 lb-ft, respectively, pushing the supercharged 350Z from 380.0WHP to 412.2WHP and 328.8 lb-ft to 351.7 lb-ft at 6,800RPMs.
Personally, I have never seen a set of camshafts made this much of power before (F-Con?). I'm a Rev-up dude so I'll have you guys with Non Rev-up experience this first.
JJ
Thread
Thread Starter
Forum
Replies
Last Post
