Just need some quick help. I have the following cooler:



On the top it has 3/8in barb inlet and outlet fittings. I want to figure out how to adapt that to -AN. Possible? I've been looking everywhere and so far I can't find anything.

 

Look at a company called "swagelok" for their hose straight connectors.

 

so the cooler is tapped with a 3/8"NPT and you just wanna make that -AN?
http://www.anplumbing.com/shop/index...&dept=Aluminum

 

No. It has an inlet/outlet barb that is not threaded. I think I found something that will work.

 

what did you find? I've always wanted to do that too... on the radiator side as well as external ATF cooler...

 

Best way is to cut and weld. Or you can go with the socketless hose.

 

If it works I'll post it up. As soon as I have my APS oil pan I'll be doing it but that may take a while due to APS shipping = slooooooooooooooooooow. I'll update this though after its done.