I just ordered my JWT PC/Z Tube from Grubbs and should be here in a few days. Besides the AC line issue, is there anything unusual I should look out for during installation?? I have already printed speedaholic's DIY, and it looks pretty simple. Will I need to do an ECU reset upon completion of the install??

'04 G35C / 6MT / DP / Graphite / Prem / Aero / Pedals / Clears

 

If you haven't done an ECU reset for a while, it may be worthwhile to do. In fact, it's a good idea to do this before installing any mod, going for a drive, then doing it again after the mod install, just to see if it's the reset that is making the difference, or the mod you just paid for!

That said, most of what the Z-tube does is to remove the resonators, and smooth the path of the airway a bit, so the ECU re-set may or may not be noticed.

<font color=blue>[i]GroundingGear™ Equipped </font color=blue>

 

Just finally read that entire 20 page thread on ECU resetting, and went outside and got it on the first try!! Can't really tell if it changed anything just yet...will have to take a spirited drive after work today to feel it. Hopefully my tube and PC will be here before Sunday...

Thanks for the input!

'04 G35C / 6MT / DP / Graphite / Prem / Aero / Pedals / Clears