I have a JWT 700bb kit installed in my g35. The car was built by VinnyTenRacing and I bought it like this. The valve cover seems to seep a little oil but that's not to much of a big problem. The problem is the oil return lines on the turbo which aren't stainless steel. It is leaking a little and so is the Coolant line for it. I've been looking for stainless steel lines for the oil return and the coolant line, but I can't seem to find it. Does anyone know where I can buy it? Also does anyone have the check engine light on for the o2 sensors running rich? Mine is on...

 

anyone?...bump

 

Forged performance makes a kit but I dont know if it fits a JWT kit.

 

It only fits the Greddy kit.

 

Tighten the clamps/get new clamps. It is a horrible coolant set up and the oil returns on have leaked after I have messed with things but usually once I tighten them they are good. My only complaints about the JWT kit.

 

call vinny, hell take care of it

 

You can always get new lines made, if you can swap them out yourself it shouldn't be too expensive at all. Just pull the old ones and take them down to one of those hose and fitting places and have them make you a new one in the same length.

Pull the plugs and check to see if there's oil in the spark plug tubes, if there is you'll need to replace the whole valve cover.

You'll need to get an Osiris reflash to take care of the CEL, Vinny's not an uprev protuner so he can't tuner with their software, but its pretty much the only way to get rid of the CEL's you get with FI. Do you know what the cars tuned with?