03 g35 weird cam position sensor problem
#1
Join Date: Mar 2009
Location: travelers rest SC
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
03 g35 weird cam position sensor problem
Ok guys , the other day while driving our 03 g35 sedan it just cut off, hard to start back and was showing the vdc/slip light was on along with the service engine soon light... Ok figured it was the Cam sensor so. Scanned it and it was showing bank 1 so I ordered one from rock auto and just put it in. Cleared all the codes and upon start up it was still hard to start but not as bad as before, I drove the car around a little bit cut it on and off a few times and it still was a little hesisitant on start up. Went and parked the car for a few and re started it and damned if the vdc/slip light is back on and so is the service engine light and when I check the codes it is showing the bank 1 cam sensor again... The sensor I used is a Delphi has anyone had problems with bad sensor from them right from the box? Thanks in advance for any help guys!
#3
OEM sensors for sure. But I'd rather get them from some place you can keep returning until you get one that works. If this ACTUALLY is the problem-- it's pretty well known just replacing it once will almost never work. Took me about 6-8 to fix my issue.
To be fair, I had a bunch of other **** going on. A list of mods would be helpful if you got something major going on (ie boost / ecu)
To be fair, I had a bunch of other **** going on. A list of mods would be helpful if you got something major going on (ie boost / ecu)
Thread
Thread Starter
Forum
Replies
Last Post
Thaaa_king
Engine, Drivetrain & Forced-Induction
0
07-18-2015 05:56 PM