I need help installing a idler pulley delete kit.
#2
Search for the graphic from Z1. Basically, you take your belts off, hold the pulley in place (chain or strap wrench), unbolt the four small screws, and then take that bracket off. The little spacer goes on the top corner where that bracket would go and you reinstall th bolts in the block. Get some pb blaster and drench the pulley in it. Helped me a lot with mine.
#3
Not to be one of those dick bags, but this is the top result when I googled "G35 idler pulley delete" and its probably what your looking for.
http://my350z.com/forum/engine-drive...with-pics.html
http://my350z.com/forum/engine-drive...with-pics.html
#4
Scroll down to post #4 and he gives pretty clear instructions. For what its worth, I did this a while back, and the hardest part was getting the proper belt from the guys at O'reillys...
And you will need a spacer, ( it is a Nissan part, dont know the PN off hand) unless you cut part of the bracket off, like he does in the link above. Good luck, it looks way cleaner with it gone.
And you will need a spacer, ( it is a Nissan part, dont know the PN off hand) unless you cut part of the bracket off, like he does in the link above. Good luck, it looks way cleaner with it gone.
Thread
Thread Starter
Forum
Replies
Last Post
EricF
G35 Sedan V36 2007- 08
3
08-28-2015 08:27 AM