What would be the best Accelerator Pedal to use on a
G35 coupe LS3 / 6L80 DBW Swap.
I had a 2013 Silverado pedal but it can't fit properly and it's a composite
pedal so can't cut and weld it.
What did others on here use for the best fit?

best place to ask is https://my350z.com/forum/engine-swaps-558/

Get this man an answer!

I Guess No-one on here, has done an LS-Swap, and changed their pedal.

I never received an answer on that forum either.

Oh well, when i had my Supra i could get help on multiple forums, this is really disappointing.
I know alot of people have done the swap, i was just hoping for some help/input.

I am doing a vk56de swap in my g and I am using the stock pedal.

I originally planned on using a 4.6l supercharged out of the xlr-v which used an ls3 type throttle body and it would have been u\easy enough to just connect the signlas.

Technically you don't need a special pedal, if you have a fly by wire car and a fly by wire motor, find the wiring for each and match the signals...

My 2 cents, but what do I know

Check out the 'G57 Sedan Build Thread.' Post #5.

https://g35driver.com/forums/media-s...ld-thread.html

G35Drew is doing an LS1 build. He is using S13 pedals. You might PM him for any insight he could offer.

The Ls1 and S13 is a Drive by Cable no Drive by wire.

Have you looked at 04-06 GTO's? My 06 pedal looks a lot like my G pedal but I have no idea if it would work. 04's had the LS1 and the 05-06's have the LS2.

Thanks for the replies, I took a 2007 impala pedal, cut off the pedal and re-welded the G35 pedal to it, looks stock now.