FS[Canada]: FS: Tomei cams 272 deg in/ex 11.3/11.0 in/ex lift (non-rev DE)
FS: Tomei cams 272 deg in/ex 11.3/11.0 in/ex lift (non-rev DE) - Price drop!
Gonna see if there's any interest for these here. I've run out of steam mentally to go after big N/A power with this motor, hopefully someone else can put these to good use.
Tomei 272 duration cams with 11.3/11.0mm lift in/ex
These are on the more aggressive side, and you will in all likelihood need upgraded valve springs. I decided to skip on any of the smaller cams because if you're gonna go in there you might as well do it big the first time.
I paid $1200 for these, so I'll sell them for $1000 firm -----> now $850 -----> now $600!!!

Tomei 272 duration cams with 11.3/11.0mm lift in/ex
These are on the more aggressive side, and you will in all likelihood need upgraded valve springs. I decided to skip on any of the smaller cams because if you're gonna go in there you might as well do it big the first time.
I paid $1200 for these, so I'll sell them for $1000 firm -----> now $850 -----> now $600!!!

Last edited by skidz88; Jun 10, 2012 at 10:10 AM.
Since I have my new Genesis already, I'm not really motivated to move these anymore, especially not at $600. Decided I'll hang on to them for a bit until the right buyer comes along. All proceeds would go to modding the Gen Coupe anyway lol.
What one person thinks is unjustified may be absolutely necessary to another person(like me). The non-rev VQ DE has no hope of making any significant power without cams...unless it's boosted.
What one person thinks is unjustified may be absolutely necessary to another person(like me). The non-rev VQ DE has no hope of making any significant power without cams...unless it's boosted.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Suspension-Vendor
257
Dec 18, 2018 05:43 PM
alxmlr789
20 Inch
9
Jan 26, 2016 10:04 AM
Hogbone
Engine, Drivetrain & Forced-Induction
2
Sep 28, 2015 06:44 PM







