FS: Forge Wastegate Actuators for use with APS TT Kit
Forge Wastegate Actuators for use with APS TT Kit
I have a set (two) Forge billet wastegate actuators for the APS TT kit used on the G35/350Z. The actuators that come with the kit will usually only allow 10psi of boost, if that, before the gates stat blowing open.
If your building your enigne and staying with the APS standard kit, these are a must have.
I have 2 sets of springs with these actuators, the red springs, which run about 12psi before adding a boost controller, they are currently installed in the actuators. I also have green, though I never ran them to see what boost setting they are, but they are lighter than the red.
Price is $250. Buyer pays shipping and fees.
Located in Dillsburg, PA.
Contact me via PM or forcefedred@gmail.com
Pictures.
If your building your enigne and staying with the APS standard kit, these are a must have.
I have 2 sets of springs with these actuators, the red springs, which run about 12psi before adding a boost controller, they are currently installed in the actuators. I also have green, though I never ran them to see what boost setting they are, but they are lighter than the red.
Price is $250. Buyer pays shipping and fees.
Located in Dillsburg, PA.
Contact me via PM or forcefedred@gmail.com
Pictures.
Last edited by BlinkerFluid; Jul 15, 2010 at 04:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Freeman186
Engine, Drivetrain & Forced-Induction
1
Sep 6, 2023 10:07 AM
Mad A
Not G35 Related
4
Dec 8, 2015 01:45 PM
JG_G35
19 Inch
14
Sep 19, 2015 09:04 PM
JG_G35
Engine - Intake/Fuel
2
Sep 7, 2015 09:35 PM
