FS: JWT 530BB Twin Turbo Kit
#1
07-28-2010, 09:28 PM
JWT 530BB Twin Turbo Kit
I have a used JWT 530 BB kit for sale
It includes all necessary hardware, but you will need to get some new parts like vacuum line, misc clamps, etc. Nothing major tho.
Both turbos are good with no shaft play or oil leaks.
It includes:
2 turbos and manifolds
dual intercoolers with all piping
JWT popcharger and heat shield
greddy BOV custom flange welded onto charge pipe
oil pan spacer, hard lines
Heat shields
JWT split second box (I would seriously recommend using a different EMS, I was tuned with Osiris)
Jim Wolf windshield washer fluid relocator
This kit made 403 whp on my car at 7psi. Used for around 5000 miles.
I'm selling because I upgraded to a GTM stage 2 and a built block.
Looking for $3700 plus shipping and paypal
Extra stuff to go with it:
I also have fast intentions test pipes with an additional O2 bung welded on
$200 plus shipping
wahlbro 255 fuel pump with filter
$85 plus shipping
Bumper support with holes pre drilled to mount the intercoolers
$150
How it looked on my car
Located in the Portland OR/ Seattle area.
It includes all necessary hardware, but you will need to get some new parts like vacuum line, misc clamps, etc. Nothing major tho.
Both turbos are good with no shaft play or oil leaks.
It includes:
2 turbos and manifolds
dual intercoolers with all piping
JWT popcharger and heat shield
greddy BOV custom flange welded onto charge pipe
oil pan spacer, hard lines
Heat shields
JWT split second box (I would seriously recommend using a different EMS, I was tuned with Osiris)
Jim Wolf windshield washer fluid relocator
This kit made 403 whp on my car at 7psi. Used for around 5000 miles.
I'm selling because I upgraded to a GTM stage 2 and a built block.
Looking for $3700 plus shipping and paypal
Extra stuff to go with it:
I also have fast intentions test pipes with an additional O2 bung welded on
$200 plus shipping
wahlbro 255 fuel pump with filter
$85 plus shipping
Bumper support with holes pre drilled to mount the intercoolers
$150
How it looked on my car
Located in the Portland OR/ Seattle area.
Last edited by seymore4; 07-31-2010 at 09:45 PM.
#4
08-05-2010, 04:37 PM
Join Date: Sep 2009
Location: Houston, Tx
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
#5
08-05-2010, 04:47 PM
The 515whp number in his sig is likely from after he installed the GTM stage 2 and built block. This kit made 403whp on his car. Dyno graph he included also reflects 403whp.
#7
08-05-2010, 05:36 PM
I currently have a built block, GTM stage 2 TT kit with a return fuel system and made 515whp. Whenever GTM decides to ship me my new injectors ("backordered" for 6 months) I'm going to swap out my fast intentions dual 2.5" exhaust for 3" and get back on the dyno, trying for 600whp ish
This JWT kit is the best for stock block power; super fast spool with a stock-like torque curve, the turbos will max out around 450whp but you don't want more than 400ish without a built bottom end.
Trending Topics
#9
08-05-2010, 05:45 PM
So ure saying this kit will be safe on a stock block as long as it's not over 400hp , wow good shiet!! I wish I had the funds
Thread
Thread Starter
Forum
Replies
Last Post
boostelevator
Engine - Power Adders
1
09-09-2015 05:56 PM
JG_G35
Engine - Intake/Fuel
2
09-07-2015 09:35 PM
