Tune the right way | Cobb Accessport
This is a question from a friend of mine, he wasn't able to post, but I may have another one sold for ya.
"Is there a way to still use the cobb if your ecu has been reflashed by Technosquare or would that conflict? it is an 07 G35s 6MT VQ35HR?"
"Is there a way to still use the cobb if your ecu has been reflashed by Technosquare or would that conflict? it is an 07 G35s 6MT VQ35HR?"
The accessport will write over technosquare to my knowlege.
Got mine yesterday, had a problem getting it to work, this is a message that Joe the firmware engineer for nissan/infiniti at Cobb sent that fixed the problem, now it works like a charm.
Do an update on your AccessPORT. I found a problem with the 2005 G35X. You'll need to update to beta firmware.
Here are some very quick steps.
1. If you haven't already Downloaded and installed AccessPORT updater, you can get it here:
http://www.accessecu.com/support/AccessPORTUpdater.exe
2. run the updater with out your AccessPORT pluged in. There migh be a few cation screens that pop up to tell you that your AccessPORT is not plugged in, just close those.
3. Go to "Tools->Options"
4. Now there should be a little window that opened up, check the box for "Check for beta AccessPORT firmware"
5. Click "OK"
6. Now back in the main AccessPORT Updater window click the "Update" button.
Now just wait for it to finish.
Do an update on your AccessPORT. I found a problem with the 2005 G35X. You'll need to update to beta firmware.
Here are some very quick steps.
1. If you haven't already Downloaded and installed AccessPORT updater, you can get it here:
http://www.accessecu.com/support/AccessPORTUpdater.exe
2. run the updater with out your AccessPORT pluged in. There migh be a few cation screens that pop up to tell you that your AccessPORT is not plugged in, just close those.
3. Go to "Tools->Options"
4. Now there should be a little window that opened up, check the box for "Check for beta AccessPORT firmware"
5. Click "OK"
6. Now back in the main AccessPORT Updater window click the "Update" button.
Now just wait for it to finish.
