Aluminum Under Tray (Splash Shield) for G35/350Z/G35X/G37/G37X
12 Attachment(s)
If you are like me, someday you will be cruising on the highway and suddenly hear a rubbing/scratching sound coming from under your engine. The stock plastic splash shield pulls away from the bumper and leaves you wanting something better, well here it is:
* Aluminum - to keep it lightweight * Better Protection for your engine * OEM ground clearance or better * Extra rigidity at high speeds * OIL DOOR - if you change your own oil this will make it much quicker. 2 Bolts and you have access to filter and drain plug Raw Aluminum and Black Powder Coated options are available for all parts ENGINE UNDER TRAYS G35 / 350Z 2003-2006 RWD G35 Sedan 2003-2007 G35 Coupe 2003-2009 350Z Go here to purchase >>>>> G35 & 350Z Aluminum Engine Under Tray Attachment 243519 Attachment 243520 2004-2006 G35X Go here to purchase >>>>> AWD G35X Aluminum Engine Under Tray Attachment 243521 Attachment 243522 HR G35, G37 & 370Z 2007-2008 RWD G35 Sedan 2008-2012 G37 Coupe 2009-2012 G37 Sedan RWD only 2009-2012 370Z Go here to purchase >>>>> Infiniti G35HR and G37 Under Tray Attachment 243523 Attachment 243524 HR G35X & G37X 2007-2008 AWD G35X Sedan 2009-2013 G37X Coupe 2009-2013 G37X Sedan AWD only Go here to purchase >>>>> Infiniti G37X & 2007-2008 G35X Under Tray Attachment 243525 Attachment 243526 REAR/BELL HOUSING UNDERTRAYS 2003-2006 RWD G35 Sedan Go here to purchase >>>>> RWD G35 Sedan Bell House Tray Attachment 243527 Installed Brushed Combo on a sedan(pic courtesy of riforever80) Attachment 243528 2003-2007 G35 Coupe Go here to purchase >>>>> G35 Coupe Bell House Under Tray Attachment 243529 2004-2006 G35X Go here to purchase >>>>> 2004-2006 G35X Bell House Panel Attachment 243530 |
do the holes match up to drain the coolant?
|
Yes. All holes match to stock. There are two drainage holes..one for coolant and one for auto trans cooler lines.
|
Very nice! Great price too, Mine is falling apart, will be talking to you in the future.
|
How long is shipping to 55306? Will be ordering this is the next 2 weeks.. tired of trying to get the oem guard to work with aftermarket bumpers.
|
Wish these things were made slammed car friendly...
|
congrats on being back tolbooth!
|
Originally Posted by thescreensavers
(Post 6421595)
Very nice! Great price too, Mine is falling apart, will be talking to you in the future.
Originally Posted by SuperCleanG
(Post 6421819)
How long is shipping to 55306? Will be ordering this is the next 2 weeks.. tired of trying to get the oem guard to work with aftermarket bumpers.
Originally Posted by parhamm1
(Post 6421825)
Wish these things were made slammed car friendly...
|
Originally Posted by redpearl99
(Post 6421835)
congrats on being back tolbooth!
|
I can personally vouch for these.
I've had one of Toolbooth's trays on my car for nearly 2 years now. It's worth it for the oil change door alone :bowrofl: But seriously though, sooooo much better than the plastic piece of crap (that came loose and scared the crap out of me after a high speed run BTW) |
+1 to all positive comments! I have had mine for a while saved me a couple times, pine cones, rocks, aluminum cans, whatever blows into the road while your driving..........
Plus it strengthens your front bumper, I have a strafe nismo rep(fiberglass) and I hit a retread from a semi truck on the freeway. Only scratched the paint, no bumper damage. Oil changes take only a few minutes too! |
Originally Posted by Tolboothwilley™
(Post 6421837)
I'll be here - just let me know.
Shipping to MN will take 3-4 days - i ship via UPS. What problems have you been experiencing with aftermarket bumpers? I have made some special front pieces for a few people where the new bumper is longer than stock. I know several people running this who are "slammed", some on bags. How low are you? This generally helps with clearance. Depending on your situation some custom adjustments can be made. I will also be pretty low, I was under the impression this helps as stated by others in this thread |
Good to see you back from your extended hiatus. PM me when you make another run of the v35 AWD.
|
I'll take one. How do I order?
|
Originally Posted by SuperCleanG
(Post 6422112)
This time around I have the Kuruma poly bumper and it sits up against the plastic undertray, which is good since it keeps it from falling, however it needs to be drilled to attach bolts to the 2 pieces. Does the new piece just sit flush, is there a gap or does it have to be attached?
I will also be pretty low, I was under the impression this helps as stated by others in this thread
Originally Posted by ccc123pm
(Post 6422144)
Good to see you back from your extended hiatus. PM me when you make another run of the v35 AWD.
Originally Posted by Phil DeVtec
(Post 6422150)
I'll take one. How do I order?
|
All times are GMT -4. The time now is 02:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands