Big feeler: My TN kit...
Joined: Nov 2003
Posts: 1,335
Likes: 2
From: Broward
Big feeler: My TN kit...
Anyone local (Orlando) Want to make me an offer for my stg. 1 TN kit? Comes with everything, overboost pipe included, Pipes, IC, AC lines, rc 440 Injectors with clips, swap ecu with you for the TN flash, oil pan spacer. AND!!!! if you want we can do a free install at my house. Probably take a day and a half maybe two because I need to remove from my car and put into yours
Make me a reasonable offer......anyone?
Make me a reasonable offer......anyone?
Joined: Nov 2003
Posts: 1,335
Likes: 2
From: Broward
Okay looked at some numbers, new kits go for about 4800-5000. Oil pan + 440 injectors would go for about 400-500 new. I'm including the 380cc injectors too, that's a good 150-200 bucks. Install would be about 800-1200 bucks. So if you went with a new one you'd be in for 6-7 grand almost.
I'm hoping for about 4500 but completely willing to negociate... I want twins!! Screw my single turbo dreams lol! 05's no guarantee, but I'm willing to try if you let me, just the intake pipe has to modded with a spacer to clear the cam covers I think. I need to graduate too!
I'm hoping for about 4500 but completely willing to negociate... I want twins!! Screw my single turbo dreams lol! 05's no guarantee, but I'm willing to try if you let me, just the intake pipe has to modded with a spacer to clear the cam covers I think. I need to graduate too!
Originally Posted by 98intrigue
If I had a credit card where the bill wasn't sent to my parents house...I'd be all over this.
That's a great line.
Trending Topics
Stepping in.............
All I had to do for it to fit an 05 revup was to Dimple (hammer time) the under side of the tube that comes across the timing cover. Also, I needed to use a slightly longer section of 3" hose after the MAF housing.
That's it.
I went a step further and modded my sedan to fit the 350Z kit so that the air filter and tube go straight through into the front bumper area.
Electronics wise.......I am using a UTEC!
All I had to do for it to fit an 05 revup was to Dimple (hammer time) the under side of the tube that comes across the timing cover. Also, I needed to use a slightly longer section of 3" hose after the MAF housing.
That's it.
I went a step further and modded my sedan to fit the 350Z kit so that the air filter and tube go straight through into the front bumper area.
Electronics wise.......I am using a UTEC!
Joined: Nov 2003
Posts: 1,335
Likes: 2
From: Broward
I'd love to see that sedan in action and I want to see the blingy plenum in person too
Jose call up Jeremy and get a utec and lets do this man!
I've got plenty of hammers
Jose call up Jeremy and get a utec and lets do this man!
I've got plenty of hammers
Originally Posted by Gilley
That's a great line.


