October 2010 discussion thread !!! O[-<]:
#516
? = 2B || !2B
iTrader: (22)
^Oh man, people say it looks better in person. They're not kidding, that pic does no justice at all.
I got it from a friend, but eBay is about the best price.
One trick, make sure you use a blow dryer or heat gun around any bends.
A little heat, and the stuff is easy to work with, but cold... it's almost imopssible
I got it from a friend, but eBay is about the best price.
One trick, make sure you use a blow dryer or heat gun around any bends.
A little heat, and the stuff is easy to work with, but cold... it's almost imopssible
#519
? = 2B || !2B
iTrader: (22)
^I just cut it off with a razor blade I had laying around..... one of the few advantages to a coke additiction.
J/K
But you'll want to trim it with a razor blade or exacto-knife. I didn't tuck it under the cover, just trimmed exactly flush with the edges of the cover, and yes, heat is an absolute MUST for anything other than a flat part.
J/K
But you'll want to trim it with a razor blade or exacto-knife. I didn't tuck it under the cover, just trimmed exactly flush with the edges of the cover, and yes, heat is an absolute MUST for anything other than a flat part.
#525
Its been done many times. My friend here in Tampa has a white G37 with the hood, front splitter, roof and rear spoiler all covered in it. I was scepticla at first but I like it just as much as the real thing and it's WAY cheaper.