Clear out your inbox.

 

sorry done!

 

shawn, i'll def install your plenum if u want. just let me know ahead of time so i can bring the proper tools. another friend of mine also wants to come to have a plenum installed, i'm sure i can get two done in one day, and maybe squeese in some overlays

 

how do you guys wanna driver down, I-95 to 826, I-75 to 826, 441 to 826, turnpike to 826 or turnpike straight down?

we shouldnt decide on a gathering point until we decide which way we are driving down. that way we can make it a convenient location for everyone.

just my $0.02

teddie and i are 2 miles away from just about every route, so you guys decide whats best for u and we can meet you guys there.

IMO the best place to meet is the BP on hollywood blvd, bout 1/4 mile from I-95. then we take I-95 south to 826.

or

we meet at the mobil on hollywood blvd and 441. which is less than 1/4 mile from the turnpike. from there we can also take 441 south to 826

 

If you look at the map, Raul is closer to the 826 so we can meet either at the BP off of I95 and take I95 to the Palmetto or if we meet on University, we can just go south on University until we hit the Palmetto.

This is up to Shawn, 2slo and imRACERX. Which one is more convenient for you guys?

 

Well i'm off the Sawgrass so i think University would be closer but i really dont care. let me know RX

 

By the way, does anyone know how to replace the driver side actuator? mine is damaged and infinit claims i voided warranty by cutting 2 frikin wires by accident upon alarm install and i am now stuck buying the actuator $120 and then do the install. I tried it the other day but when it came to remove the window parts in order to remove the second panel to acces the actuator/motor, i decided to wait and have someone help in order to hold the window etc etc. hopefully one of you guys can help. please let me know.
below is a response from a member on how its done. RX

Take the panel off there will be black covers over holes, I think two of them. Remove them, now you will have to roll the window up or down a bit to see the 10mm nuts. Once you can see em remove them. The window will pull straight up and out. Now remove the second panel. There is about 15 10mm screws that hold it on. After that is removed everything else is cake! Its prett easy really.

 

I guess, I'll just bring my VDC mod to install, but University is like 1 min away from me so I'd lean towards that route. But whatever you guys decide is fine w/ me.

 

So University and Pines it is... 11:15 January 15th.

 

so i take it as a "i'm not gonna help install no lock motor"? ahh, i'll bring it anyway. later John

 

I would help if I could. But since I'm mechanically challenged I'm just going to sit there and look pretty. Haha.

 

your gonna look pretty? man u got a lot of work ahead of you j/k i couldnt resist

 

I hear ya! I can honestly say i have done all the mods on my car but this scares me. I can see myself throwing the window off track and be screwed. I will bring the motor and all instructions i can find and see what happens. RX

 

I don't know nething about the lock motor, but I'll gladly hold the window for u...

 

Yah, the hard part is trying not to get bored with a buncha gearheads on a sunday afternoon, ya know?