|
just curious why not sleeving? excuse my noobness....
regardless, im jealous!! |
^Well after speaking with Sharif @ Forged LLC he gave me most of the information about the parts that I need. I am not trying to ahve an all out monster but I am looking to have a 450-500hp daily driver. He advised me sleeving was not needed for what I want to do. Unless you intend on running 700+hp thats when sleeving the block should be strongly considered.
|
Originally Posted by Greatwars
just curious why not sleeving? excuse my noobness....
regardless, im jealous!! If you do plan on exceeding 650 RWHP and opt to sleeve the motor, you also should significantly increase the cooling capacity of your cooling system beyond what you would otherwise need for a non-sleeved motor. Perhaps some of the engine builders who have built both sleeved and non-sleeved motors can chime in on this. |
^+1. I read up a bit on the sleeving and it really isn't needed.
|
Originally Posted by Hi-Tech_G
^Well after speaking with Sharif @ Forged LLC he gave me most of the information about the parts that I need. I am not trying to ahve an all out monster but I am looking to have a 450-500hp daily driver. He advised me sleeving was not needed for what I want to do. Unless you intend on running 700+hp thats when sleeving the block should be strongly considered.
|
Eric I call dibs on the 1st ride in the 500hp DD...LOL
|
Im considering, but I am definately going to get all of my parts from him. I just want to see how long the turnaround time is. He and I are going to be talking alot.
Originally Posted by Hexxum001
So are you gonna let Sharif build your VQ for you? :biggthumpup:
|
:D :biggthumpup: Im like a kid in a candy shop right now.
Originally Posted by G35Ian
Eric I call dibs on the 1st ride in the 500hp DD...LOL
|
def no need to sleeve it, search over on my350z.
and if you are gonna go w/ a single turbo... the only option thats gonna give you the power to go w/ the built motor is the powerlab ST if not, go twins |
Originally Posted by Hi-Tech_G
Im considering, but I am definately going to get all of my parts from him. I just want to see how long the turnaround time is. He and I are going to be talking alot.
|
GL on the Build :)
|
|
your parts room aka condo must be getting full...LOL
|
^Parts room is empty now lol. Motor and stuff went out a few days ago for machin work!
|
Cool Good Luck On Your Build Hi-tech. Post Plenty Of Pics Please.
|
| All times are GMT -4. The time now is 06:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands