R4 programming
#1
Join Date: Mar 2004
Location: Lorton, VA
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
#2
Banned
iTrader: (3)
Join Date: Nov 2003
Location: Council Bluffs Ia.
Posts: 4,446
Likes: 0
Received 0 Likes
on
0 Posts
Re: R4 programming
Not sure what your saying but , Any number you see in the B map [timing] Is timing retard.....if you see a 2 or 4 or 6 , that is how many degree's of timing is being pulled at that rpm and boost . The fuel map [Amap] I dont know if its voltage or what...just know....you raise a number...more fuel...lower...less fuel......Hopes it helps
Couldnt afford it when young...gonna play when Im old
Couldnt afford it when young...gonna play when Im old
#3
Re: R4 programming
Could anyone tell me exactly what the values in R4 programming do. Are these voltage output, and is there any kind of formula between R4 digit vs. fuel pressure/ timing retarding. Thanks in advance...
Each full number in the fuel map will increase or decrease(depending on whether it is positive or negative)the airflow meter voltage by.25 volts.A 10 would be equal to no change and a 20 would be equal to 2.5 volts being added to the airflow meter voltage.0 would be the equivilant of taking away 2.5 volts from the airflow meter voltage.
Tim
Speed Force Racing
619-328-4012
Each full number in the fuel map will increase or decrease(depending on whether it is positive or negative)the airflow meter voltage by.25 volts.A 10 would be equal to no change and a 20 would be equal to 2.5 volts being added to the airflow meter voltage.0 would be the equivilant of taking away 2.5 volts from the airflow meter voltage.
Tim
Speed Force Racing
619-328-4012
Thread
Thread Starter
Forum
Replies
Last Post