do you have jdm fogs in your ride? moar pics !!!!

 

the car is a jdm 350gt skyline not just fogs,what u want more pics of?

 

I have a PWR rad it is 52mm if I recall right. I have yet to get an oil cooler but this summer I will have one installed. I have to get my photo bucket sorted out ( I lost the pass word) or I would go snap a few pictures of the sideband gauges. It is still a work in progress the gauges are just velcroed in.

 

Mishimoto are out of stock ATM so what about this?
http://cgi.ebay.com/ebaymotors/03-07...#ht_2220wt_851

with two 14" fans?
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_1666wt_931

 

Personally I dont buy no name ebay stuff for my car, but if you are comfortable with it then go for it. I have seen too many ebay parts that dont even come close to fitting or have other issues. It is your call but the rad looks to have everything in the correct places

 

Mishimoto rads have cheap plastic caps.. i know because mimes took a dump in less then 500 miles.. dumpin coolent everywhere

 

i wouldn't buy parts off ebay... you may safe alill but in the end it may cost you alot down the road..

 

UPDATE:
DW310 pump installed
Zeitronix Zt-2 Wideband and LCD installed
Pivot Speed meter (350km speedo, g-force, 1/4mile time) installed
Utec EMS + MAP sensor installed but not connected
turboxs knock sensor/shift light installed
turboxs external 5 way map selector installed
tubroxs boost solenoid waiting for turbo to be put in
DW 600cc injectors waiting for turbo to be put in
Koyo rad and 2x 12" spel fans and .13bar cap installed
stoptech stage 2 kit (slotted rotors, ss lines, motul rbf, performance pads) installed
whiteline adjustable front and rear sway bars and upgraded endlinks installed
Hankook V12 tyres 245/40/19 and 285/35/19 on the way
Vented RFP Bonnet that will be painted on the way
HKS Turbo kit waiting for car to come back from paint shop

Some Pics
Stoptech slotted Rotors, Brembos, Stoptech performance pads, stoptech braided lines with Motul RBF 600 and BC Racing BR Coilovers


Whiteline adjustable sway bars with upgraded end links


Stock Vs Koyo Rad


Koyo Rad Racing Radiator with 2x Spel 12" fans + Koyo .13bar cap


Zeitronic Zt-2 LCD, Pivot Speed Meter V, Turbo XS map switch, Turbo XS Knock/Shift Light


Bonnet to come!


Pics with Turbo will be soon!

 

Lookin good Mate.. cant wait to see the end results...keep us posted..

Yea Def a HUGE Difference...

 

To my knowledge, on our platform the UTEC knock light does not work - sorry.

 

Is that a G/Z kayo the mounting points look like they will way to narrow for the G maybe it is just the picture?

 

You tested on out or ?? When i was parking i was in 3rd/4th gear and engine almost stalled, gave a real "chutter" and guess what, orange light came on knock sensor...

 

I brought it off idrivesti who had it on his G but im 100% sure its a 350Z Koyo as the rad neck is on wrong side, its in middle to right and should be on the left...

But apart from that it fits perfect and other lower and upper rad hoses fit 100%
I was gonna make bracket up to lock in the mounting tabs but honestly ill do it later as the force of the hoses keep it in bay. The aircon rad fits in the slots in front of it perfect also. No mods needed except a longer overflow pipe.

Oh yeah also the front airduct will not fit due to the fill cap being in the way, but as im going FI i dont need it .

Anyone got any ideas how to connect the tubro XS boost solenoid?

 

When I tried a UTEC several years ago, the shift light and knock light both were not functioning - this is what an engineer at TurboXS told me. Perhaps they have it working now (but I doubt it since I don't think there has been a software update in 5 years).

 

Shift light works perfect, goes off when ever shift point it set except for 1st gear. I only just brought it so who knows.. I even turned sensitivity up to max and it retarded my power as it was sensing knocks to much.. (i didnt even know it would do this). At first i unplugged it cause i couldnt make it up my drive way and didnt know what was happening. I then realized it may have been due to me turning it all the way up.. have not tested it again.