Forced Induction Discussion of turbos , superchargers , and nitrous upgrades on the G35

If you're thinking about getting a Vortech SC

Old Jan 18, 2005 | 10:16 PM
  #1  
gersteinp's Avatar
Thread Starter
|
Registered User
Joined: Oct 2004
Posts: 134
Likes: 1
If you're thinking about getting a Vortech SC

I've rummaged through the giant 80 lb Vortech box, just mentally going through the steps before my install in February. The parts, including the blower, intercooler, bracket and piping, seem extremely well made and very solid. Each of the numerous boxes of separate parts packed into the large box were hand inspected and signed-off. The kit is far nicer in quality, finish and sheer strength then I expected it would be.

I bought the kit through Avalon Racing and pestered Paul with numerous questions both by phone and e-mail over several weeks to get things right in my head about it. Paul was patient, knowledgable, and extremely responsive, often answering my e-mail questions within minutes. I have never had a more positive experience with any vendor I've found through the internet. I highly recommend Avalon Racing. I'm going to do the install myself and bring my car up to Londonderry, NH to have the gauges installed and the car dyno tuned.
 
Reply
Old Jan 18, 2005 | 11:58 PM
  #2  
iLLG35's Avatar
NY G-Squad G Race Driver
Joined: Aug 2003
Posts: 4,172
Likes: 1
From: NYC
Good luck with it man, tune it well and dont abuse it, i dont want to hear about another blown engine incident, godforbid!
 
Reply
Old Jan 19, 2005 | 10:54 AM
  #3  
GlenRoseFireFighter's Avatar
a.k.a. RANDYS_G
Joined: Feb 2004
Posts: 6,417
Likes: 0
From: Glen Rose, Texas
where do you live? I ask because I was wondering where you plan to have the install done.
 
Reply
Old Jan 19, 2005 | 01:56 PM
  #4  
GReddySetGO's Avatar
Registered User
iTrader: (68)
Joined: Oct 2004
Posts: 2,445
Likes: 0
From: Arcadia, CA
He said he planned on doing it himself.

If you're looking for a place in SoCal to do your Vortech, I can do it
 
Reply
Old Jan 19, 2005 | 02:07 PM
  #5  
gersteinp's Avatar
Thread Starter
|
Registered User
Joined: Oct 2004
Posts: 134
Likes: 1
Yes, I am going to do it myself with the help of a couple of knowledgable friends. I live in Amherst, MA. I could have it installed at XX Tuning in Hartford, CT or KTR Racing in Central Mass., but I would bring it to Avalon Racing in Londonderry, NH because of their experience (dozens of Vortech installations on Gs and 350Zs). I've decided to try it myself because I'm lucky enough to have the use of a second car during that week. This car is my daily driver.

I'll definitely be bringing it up to Avalon for the dynotune.
 
Reply
Old Jan 19, 2005 | 03:33 PM
  #6  
GlenRoseFireFighter's Avatar
a.k.a. RANDYS_G
Joined: Feb 2004
Posts: 6,417
Likes: 0
From: Glen Rose, Texas
Originally Posted by gersteinp
Yes, I am going to do it myself with the help of a couple of knowledgable friends. I live in Amherst, MA. I could have it installed at XX Tuning in Hartford, CT or KTR Racing in Central Mass., but I would bring it to Avalon Racing in Londonderry, NH because of their experience (dozens of Vortech installations on Gs and 350Zs). I've decided to try it myself because I'm lucky enough to have the use of a second car during that week. This car is my daily driver.

I'll definitely be bringing it up to Avalon for the dynotune.
Cool. Good luck and I'll keep you posted regarding that Injen pipe for the system.
 
Reply
Old Jan 19, 2005 | 08:16 PM
  #7  
gersteinp's Avatar
Thread Starter
|
Registered User
Joined: Oct 2004
Posts: 134
Likes: 1
Great. I'm hoping you can get that Injen replacement pipe ready before the last week in February when I do my install.
 
Reply

Trending Topics

Old Jan 19, 2005 | 11:30 PM
  #8  
G-Mann's Avatar
Registered User
Joined: Apr 2004
Posts: 1,082
Likes: 0
From: southlake, TX (DFW)
damn, cant wait till i get my vortech!!
 
Reply
Old Jan 20, 2005 | 11:38 AM
  #9  
hogwild's Avatar
Registered User
Joined: Jul 2004
Posts: 8
Likes: 0
CARB legal

Vortech give you any clues about CARB legal status when you bought the unit?
 
Reply
Old Jan 20, 2005 | 12:56 PM
  #10  
GlenRoseFireFighter's Avatar
a.k.a. RANDYS_G
Joined: Feb 2004
Posts: 6,417
Likes: 0
From: Glen Rose, Texas
Originally Posted by hogwild
Vortech give you any clues about CARB legal status when you bought the unit?
Yeah, they told me they were working on it and it should be out soon...that was back in October! I've been in contact with them recently and they said that have lined up a car to get the cert on...we'll see.
 
Reply
Old Jan 20, 2005 | 03:19 PM
  #11  
kzanard's Avatar
Registered User
Joined: Oct 2003
Posts: 291
Likes: 0
From: Quincy, MA
gersteinp, Good luck with the install! You will be happy with Avalon as that is where I have purchased most of my mods (including s/c). Great service. They did my s/c install & tuning. I also had them do all re-tuning each time I had another major component installed (headers, plenum, etc.).
 
Reply
Old Jan 20, 2005 | 03:39 PM
  #13  
gersteinp's Avatar
Thread Starter
|
Registered User
Joined: Oct 2004
Posts: 134
Likes: 1
Thanks to all of you for your encouragement! Luckily, I've got two cracker jack mechanic friends to help me And, Paul from Avalon Racing for phone advice. Once again, I couldn't be happier with the service I've received from Paul.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
StreetStandard
Engine-Vendor
117
May 22, 2020 08:21 AM
redonblack35
Accessories
19
Feb 13, 2016 11:19 AM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 12:33 AM.