List Your DIY Jobs!
#1
Join Date: Sep 2005
Location: MANOA
Posts: 1,943
Likes: 0
Received 0 Likes
on
0 Posts
List Your DIY Jobs!
I dont' know if you guys will think this is lame or is there was a post like this before. But if we all list our mod that we did ourselfs, we can help eachother out when the next person is trying to do a DIY. i'll start:
Custom fogs in lower grill
Custom ground wires
Custom Intake tube
Modified Lower plenum, plus port and polished (upper and lower)
S-tech springs
Crawford HFC's
Neons under seats and dash (lol)
Custom sub box
Modified orange light (blinker)
Clearance and clear corner lights
um... shaved emblems...
edit.
MD 1/2 spacer and iso thermal gasket
Custom fogs in lower grill
Custom ground wires
Custom Intake tube
Modified Lower plenum, plus port and polished (upper and lower)
S-tech springs
Crawford HFC's
Neons under seats and dash (lol)
Custom sub box
Modified orange light (blinker)
Clearance and clear corner lights
um... shaved emblems...
edit.
MD 1/2 spacer and iso thermal gasket
Last edited by aleok; 06-22-2006 at 06:21 PM.
#4
B&M transmission cooler
portmatch/polish intake from venturi ring to intake tract of heads
TSX/TL clear lens projector headlights with CCFL signal strip/clear signal
caliper relocation bracket for 345mm rotors with Brembo calipers
M45 shift **** and boot
port matched exhaust piping Y-pipe to B-pipe to muffler
polished Crawford V5 plenum
painted door trim piece for power window switches
portmatch/polish intake from venturi ring to intake tract of heads
TSX/TL clear lens projector headlights with CCFL signal strip/clear signal
caliper relocation bracket for 345mm rotors with Brembo calipers
M45 shift **** and boot
port matched exhaust piping Y-pipe to B-pipe to muffler
polished Crawford V5 plenum
painted door trim piece for power window switches
#5
Never enough
iTrader: (4)
Join Date: May 2004
Location: Sac town
Posts: 4,339
Likes: 0
Received 0 Likes
on
0 Posts
MODIFICATIONS
Exterior:
Full custom paint job.
Custom Kenstyle front bumper to fit intercooler Kenstyle rear bumper
INGS skirts
Seibon CF hood
INGS spoiler
Custom vented fenders w/ polished cross bars
Color modded/matched headlights
Front and rear hood shocked painted to match
Engine:
APS Twin Turbos with custom grind cams
SSV intake manifold
Color matched valve covers
Color matched battery covers
Pi-thon clamps and fluid covers
Samco hoses including Vacuum
Polished front motor cover
JWT Clutch/Flywheel
NX Intercooler system with bottle opener and purge
SVR 3in dual exhaust
JDM right hand battery cover
Suspension:
Asanti AF=112 20x10 20x8.5 Chrome lip with a black face
D2 coilovers
Cross drilled/slotted rotors
Interior:
Custom Gauge consoles
Boost,Oil pres,Water temp & Oil temp gauges
Interior wrapped in Blue Sparco suede
Sparco blue suede shift ****
05 pedals
JDM Custom painted main console and center console
I.C.E:
Kenwood DD 7017
Modded NAV Screen
MB Quart 12's mids/highs and Amps
Stinger wiring
Custom tubbed fiberglass trunk
Custom fiberglassed deck lid with two 8in lcd's
Custom center console with Xbox
Exterior:
Full custom paint job.
Custom Kenstyle front bumper to fit intercooler Kenstyle rear bumper
INGS skirts
Seibon CF hood
INGS spoiler
Custom vented fenders w/ polished cross bars
Color modded/matched headlights
Front and rear hood shocked painted to match
Engine:
APS Twin Turbos with custom grind cams
SSV intake manifold
Color matched valve covers
Color matched battery covers
Pi-thon clamps and fluid covers
Samco hoses including Vacuum
Polished front motor cover
JWT Clutch/Flywheel
NX Intercooler system with bottle opener and purge
SVR 3in dual exhaust
JDM right hand battery cover
Suspension:
Asanti AF=112 20x10 20x8.5 Chrome lip with a black face
D2 coilovers
Cross drilled/slotted rotors
Interior:
Custom Gauge consoles
Boost,Oil pres,Water temp & Oil temp gauges
Interior wrapped in Blue Sparco suede
Sparco blue suede shift ****
05 pedals
JDM Custom painted main console and center console
I.C.E:
Kenwood DD 7017
Modded NAV Screen
MB Quart 12's mids/highs and Amps
Stinger wiring
Custom tubbed fiberglass trunk
Custom fiberglassed deck lid with two 8in lcd's
Custom center console with Xbox
#7
Never enough
iTrader: (4)
Join Date: May 2004
Location: Sac town
Posts: 4,339
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
just wondering, how did u take apart your dash to put in new console and how do u take apart the part w/ the stick (auto), seems to be held down by something, if anyone knows how to take apart that part, and how to take apart the radio part and how to take apart the odometer, that would be much helpfull. thanx ahead of time.