The G-Spot General discussion about the G Series;
G35 & G37, Coupes & Sedans

Can Somebody Please Help Me W/ My G35

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Nov 26, 2007 | 10:19 PM
  #1  
onegdirty5's Avatar
Thread Starter
|
Registered User
Joined: Nov 2007
Posts: 8
Likes: 0
Angry Can Somebody Please Help Me W/ My G35

Whats up everybody.....ok heres the problem i have with my g coupe 5at....i turn the car on and it drives fine for like 5 minutes after the 5 minutes the car shuts off on me....i restart the car and all the lights in the cluster lights up (slip,engine service soon,vdc off)...im new to g35driver so can somebody please tell me what the problem might be?....thank you
 
Reply
Old Nov 26, 2007 | 10:22 PM
  #2  
617G's Avatar
CFW (Carbon Fiber Whore)
iTrader: (3)
Joined: Dec 2006
Posts: 3,787
Likes: 0
From: Boston
see if you can make it to an autozone and run an OBDII scanner to grab the codes

have you done any mods recently?
 
Reply
Old Nov 27, 2007 | 09:29 AM
  #3  
fecurtis's Avatar
Registered User
Joined: Aug 2007
Posts: 2,823
Likes: 0
From: Potomac Falls, VA
Are ALL of your gauge lights coming on?
 
Reply
Old Nov 27, 2007 | 11:54 AM
  #4  
onegdirty5's Avatar
Thread Starter
|
Registered User
Joined: Nov 2007
Posts: 8
Likes: 0
the car has no mods....i started the car today and it got worse....i turn it on and shuts back off without even driving the freakin thing....my car has 100,000 miles on it my father says it might be the spark plugs...
 
Reply
Old Nov 27, 2007 | 11:55 AM
  #5  
onegdirty5's Avatar
Thread Starter
|
Registered User
Joined: Nov 2007
Posts: 8
Likes: 0
and yea all my gauge lights are on
 
Reply
Old Nov 30, 2007 | 08:23 PM
  #6  
Ciccio's Avatar
Registered User
Joined: Mar 2006
Posts: 246
Likes: 0
From: Jacksonville, FL
Loose gas cap?
 
Reply
Old Nov 30, 2007 | 09:16 PM
  #7  
g035sedan's Avatar
Registered User
Joined: Mar 2007
Posts: 203
Likes: 0
From: East Bay Area, Ca
sounds like it has to do with fuel deliverey to me.
 
Reply
Old Dec 1, 2007 | 12:39 AM
  #8  
TurK's Avatar
Registered User
iTrader: (1)
Joined: Jul 2007
Posts: 1,290
Likes: 0
From: FL, Panhandle
been coming up on this question quiet a bit....if you search you will find other people in the same situation
 
Reply
Old Dec 1, 2007 | 12:44 AM
  #9  
garry101's Avatar
Registered User
iTrader: (6)
Joined: Feb 2006
Posts: 403
Likes: 0
From: arizona
might be your throttle body, i got mine replaced twice already. anywayz gl with it.
 
Reply
Old Dec 1, 2007 | 10:38 AM
  #10  
onegdirty5's Avatar
Thread Starter
|
Registered User
Joined: Nov 2007
Posts: 8
Likes: 0
i dont have a loose gas cap....i put gas all the time....im just goina put a scanner on it and lets see wat happens...i hope its not a major problem cause i just lost my job....oh by the way i hooked up drl's on my coupe...if anybody needs help hooking them up ask me!
 
Reply
Old Dec 7, 2007 | 08:41 PM
  #11  
onegdirty5's Avatar
Thread Starter
|
Registered User
Joined: Nov 2007
Posts: 8
Likes: 0
so i hooked up the scanner to the coupe and i got cmp sensor and knock sensor....can somebody please help me locate the two sensors please...cause i heard that sometimes the connections are loose so i just want to make sure...thanks everybody!
 
Reply
Old Dec 11, 2007 | 08:37 PM
  #12  
89rodknocker's Avatar
Registered User
Joined: May 2007
Posts: 9
Likes: 0
From: the yay area
Check for oil first sound like you dorve it with now oil and snapped the pin on the camshaft. Hopefully not. Also add some gass to the tank your gauge might be off.
 
Reply
Old Dec 12, 2007 | 12:09 AM
  #13  
onegdirty5's Avatar
Thread Starter
|
Registered User
Joined: Nov 2007
Posts: 8
Likes: 0
yeah i dont know about the oil but i hooked it up on the scanner and it came up with camshaft position sensor - bank 1 and the knock sensor and it says low voltage for the knock sensor.... so i cleaned the connection on the cmp sensor and it worked for a couple of hours but it came back so i ordered a new cmp sensor and the knock sensor ill clean it...its just a b*tch to get to
 
Reply
Old Dec 12, 2007 | 12:11 AM
  #14  
onegdirty5's Avatar
Thread Starter
|
Registered User
Joined: Nov 2007
Posts: 8
Likes: 0
hey 89rodknocker wats the pin on the camshaft?
 
Reply
Old Dec 15, 2007 | 05:12 PM
  #15  
chowdogg's Avatar
Registered User
Joined: Mar 2006
Posts: 24
Likes: 0
From: vancouver
i had a problem similar to that and at the dealership had to fix some wirrin and tighten my grounds
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
netcbc
Exterior - Body Parts CDN
2
Aug 21, 2015 09:50 AM
teamghost
Brakes & Suspension
1
Jul 28, 2015 04:52 PM
VANST3R
Lights
2
Jul 27, 2015 08:20 PM
laksjd84
Exterior - Body Parts
1
Jul 24, 2015 05:12 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 03:51 AM.